Betta Fish Heater – Your Betta Will Love [2020]

betta-fish-tank-Heater

You may know the betta fish as Siamese Fighting Fish. They are popular household pets because of their bright colors and easy maintenance. Although they are easy to care for, these brightly colored fish have specific needs in order to thrive.

betta-fish-tank-Heater

Do Betta Fish Need a Heater?

Surprisingly a lot of people think it’s okay to house their betta fish in a bowl or vase. Yes, the fish will survive in these conditions but that doesn’t mean they are doing well. If you look closely you may notice those fish are stressed out which causes them to pass away sooner than a fish in the right environment.

Betta fish are tropical fish so they don’t do very well in cold water. Especially if that cold water is dirty. This is why it’s important that betta fish are housed in a filtered and heated tank. 

If you want your betta fish to remain healthy then you need to get a heater. The heater is one of the most important pieces of equipment you can get for their tank. 

Remember that betta fish are used to tropical waters so they will always do best when their water temperature is warmer than room temperature. The temperature of your home isn’t reliable for your fish tank because it fluctuates throughout the seasons.

A heater will ensure the betta fish’s environment always has a steady temperature. This will make up for the difference in temperatures in your home, especially if you use an air conditioner in the summer. 

What You Need To Know About Betta Fish Heaters

When it comes to betta fish heaters, the first thing we should talk about is your tank. If you use a tank that is too small then you could overheat the water with a heater and likely kill the betta fish. Always make sure you use a tank that is 5 gallons or larger.

That being said, you should also monitor the water’s temperature and the heater’s settings just to be on the safe side. This will help you make sure your fish is happy in their environment. Here are some things you should know about fish heaters before buying:

do you need a heater for a betta fish

What Is The Best Temperature For A Betta Fish Tank?

Betta fish are happiest and healthiest when they live in water temperatures between 74 and 82 degrees Fahrenheit. This is closest to their natural tropical environments and easy for betta fish to adjust to. Temperatures outside this range will affect the fish’s lifespan. 

To put this in perspective for you, the average house has room temperatures between 66 and 72 degrees which is way too cold for a betta. Not to mention a lot of people allow their house to drop in temperature at nighttime to the 50s or 60s. 

One more thing you should know about the temperature of your betta fish’s water. It needs to be kept consistent, so avoid keeping it around 73 one day then 79 the next. That will cause the fish just as much stress as cold water. 

Figuring Out What Watt Size You Need

In order to keep the water in the tank consistently warm enough for the betta fish you will need to find a heater that has sufficient wattage. The ideal heater will have 3 to 5 watts per gallon of water. 

If you have a larger tank it’s recommended that you use two small heaters instead of one larger heater. This way you can provide a more even flow of heat at both ends of the tank. 

Avoid Cheap Heaters

You will notice that there are a lot of different heaters to choose from out there. It’s a good idea to get a high-quality heater for many reasons, but one in particular is adjustability. Adjustable heaters are a must-have, especially if you live in a climate where it gets really cold in the winter.

Easy To Read

Your heater must have a readable temperature scale. This makes taking care of your betta fish’s environment a lot more simplistic. You will always know when your fish’s tank is at the right temperature and can adjust it if it’s not. 

It’s a good idea to keep a thermometer near your tank too. Sometimes the water sitting around your heater is warmer than the rest of the tank, so the heater doesn’t always display the correct temperature. Using a thermometer in another area in the tank can give you a better reading.

Easy To Use Too

You don’t have time to waste messing around with a confusing heater. To make sure your heater is never going to play complicated games with you, always choose one with a large-sized control knob. This way you won’t be fighting with it to get the right setting when it’s submerged. 

Make sure your heater is easy to set up by looking for either a hanging feature or suction cups. They will help your heater stay in place once it’s in the water. 

Must Be Safe For You And Your Betta Fish

When you are picking out a heater for your betta fish, always choose one that has been rated to be safe for full submergence. If you can’t submerge it in water then there is a good chance that both you and your betta fish could get electrocuted.

Another key safety feature that good quality betta fish tank heaters have is a safety-off feature. If anything happens when you are not there to deal with it, such as water dropping below the heater, it will automatically shut off. 

Accidents can happen, so it’s a good idea to make sure your heater is both shatterproof and shockproof. Most heaters are designed to be both. These features are lifesavers if you ever accidentally drop the heater.

One more thing to consider is your betta fish’s safety. Make sure the heater you choose has some sort of safety guard or even a protective case. This will keep your pet from getting near that heating element which can get very hot. 

Shape Of The Heater

Fish tank heaters come in a variety of shapes and sizes however, the smaller-sized ones are more commonly purchased. The most common style is a torpedo-like shape that sticks to the side of the fish tank. 

That isn’t the only style available. You can find rounded heaters that are designed to stick to the bottom of a fishbowl. Among the many styles, you can also find rectangular and flat heaters. There are heaters designed for pretty much every tank.

Betta in a one gallon tank

Our 5 Best Betta Fish Tank Heaters

Now that you know more about betta fish heaters and what features to look for in a good heater, let’s show you five of our favorite betta fish tank heaters. These safe and trusted heaters are the most reliable ones for creating a healthy and happy environment for your betta fish.

We know that there’s a vast variety of fish tank heaters available on the market. When you go shopping you will probably come across so many different heaters that seem like they could be the right choice. We’ve narrowed it down to 5 of the best heaters to make shopping easier for you.

Fluval M 50-Watt Submersible Electronic Heater

This submersible electronic heater from  Fluval is a favorite among customers. It’s best when it’s used with a fish tank that is around 15 gallons. It easily blends into its surroundings so you don’t have to worry about this heater bothering your betta fish.

Fluval is a trusted brand for fish tank heaters, and this M 50-watt submersible heater is no exception to that. Its exceptional performance will do its part to keep your fish happy with their home. Your fish will most likely enjoy the reflecting colors it creates.

The thermostat is computer calibrated so it’s very easy to adjust. You’ll be able to monitor the water temperature throughout the day. There’s no need for your fish tank’s temperature to drop just because you need temperatures to cool down in your home.

You can set the temperature from the top of this heater, which makes it very easy to adjust as needed. A blue light in the front will let you know when it is heating, and it will shut off once your tank is at the right temperature. 

Fluval M50 Submersible Heater,...
  • Aquarium heater that blends into the aquarium environment with built-in reflective technology that mirrors the surrounding colors

Fluval E300 Advanced Electric Heater

Fluval makes our list of favorites once again with their E300 advanced electric heater. This heater has dual temperature sensors which is how it is able to give you the most accurate temperature reading of your betta fish’s tank. 

The thermostat can be adjusted to read in either Fahrenheit or Celcius, making it easy for everyone to read. You can always get the right water temperature because this heater has a range between 68 to 93 degrees Fahrenheit. 

You never have to worry about your betta fish’s safety because there are integrated fish guards to protect them from the heater. There is also a safety-off feature with fast technology that acts to shut off your heater when it needs to be. 

This heater also comes with a mounting bracket making it very easy to set up. It won’t take long before you get your fish’s house to the right tropical-like temperature. The display alert system lights up, making it easy for you to read too.

The Fluval E300 is a 300-watt heater, making it a great choice for tanks up to 100 gallons. It comes with a 5-year warranty just in case your fish isn’t happy with it. 

Sale
Fluval E300 Advanced...
  • Aquarium heater with dual temperature sensors provide accurate and real-time water temperatures

EHEIM Jager TruTemp 300-Watt Approved Fully Submersible Heater

This heater from EHEIM is simplistic and very reliable. It comes with suction cups, making it easy to attach to the side of your fish tank. Within a couple of minutes, you will have it up and ready to make a cozy environment for your fish.

 This incredibly durable heater is made of shatterproof glass. It’s one of the safest heaters available, as the shut-off feature will kick in as soon as it’s low on water. The running dry protection will ensure that your fish stays safe.

 EHEIM Jager TruTemp 300-watt heater comes with a TruTemp dial and readjustment ring that allows you to adjust the temperature of the water so it’s always precise. No more fussing around or fiddling with an underwater dial that just won’t co-operate.

Many customers have given this heater a 5-star review and claim that it is the only type that will use since they made the switch. They are long-lasting which is why so many customers trust this model. The extra-long cord of 5’6 is very convenient too.   

Eheim Jager TruTemp 300 Watt...
  • TruTemp dial with readjustment ring allows the user to calibrate the heater for a precise temperatur

Hygger Submersible Aquarium Heater

This submersible aquarium heater by Hygger is great for betta fish tanks. It is a 300-watt heater that is best suited for tanks that are between 30 and 60 gallons. 

If any faults occur while you’re away you won’t have to worry because of the automatic safety shut-off feature. You can also make sure your tank is at the right temperature because it will stop heating up once it reaches the temperature you have set.

The temperature range is between 75 to 91 degrees Fahrenheit. You can easily set the temperature by adjusting the dial, which allows you to set it at odd numbers within the temperature range. The built-in thermometer will help detect your water temperature.

This waterproof heater needs to be fully submerged when it’s on. It is heat resistant and explosion-proof, making it one of the safest heaters to put in the betta fish’s tank. The reliable and durable design is one of the most trusted heaters out there.

hygger Submersible Aquarium...
  • 🐠【For Fish Tank 30-60 gallon】300W aquarium heater, voltage 110-120V, power cord is 5.4ft, please choose the right wattage aquarium heater according to our size chart. Don't suggest use this...

Aqueon Adjustable Pro Aquarium 50-Watt Heater

The Aqueon Adjustable Pro Aquarium 50-watt Heater is the most accurate heater on this list. It is so precise that it can get the correct temperature within 1 degree. You will never have to guess if your betta fish is in the right temperature. 

The design is shatterproof and nearly indestructible. To guarantee this, they offer a lifetime warranty. Although betta fish aren’t destructive fish, it’s still nice to know that this shatterproof heater will remain safe when getting moved around. 

One of the greatest things about this heater is that once you set the temperature and the water reaches that heat it will automatically shut-off so the water doesn’t overheat. To make it better, the heater will kick back on when the water cools off. 

This slim betta fish tank heater has a simple, but safe design. It is easy to set up and doesn’t take up a lot of space. The non-corrosive shell provides extra strength and an even heat distribution. 

You will know when this heater has kicked on because the LED power indicator will light up red.  This 50-watt heater is best when used in a 20-gallon tank.

Sale
Aqueon Adjustable PRO Aquarium...
  • Adjustable heat setting 68 to 88°F, Electronic Thermostat accurate to +/- 1°

How To Pick Out The Best Betta Fish Heater: Which One Is The Best One?

You don’t have time to shop through every type of fish tank heater on the market, so we narrowed it down to the top 5. Of course, they can’t all be the best heaters and only one can best take the top spot. When it comes to positive customer experiences, the Fluval E Electronic Heater is the winner.

It is by far the most outstanding fish tank heater you can buy today. Not only do they offer a wider temperature range, but you can also adjust it to temperatures within 0.5 degrees. Many of the other leading heaters don’t allow you to get such a precise temperature.

This heater is also much more sleek and smaller than the other heaters. It isn’t bulky in the fish tank so it looks good without getting in your betta fish’s way. 

Since keeping your fish’s water at the right temperature should be one of your top priorities, this is the best heater because of the color-changing system. It lets you know when the water gets warmer or cooler. This will help you keep your fish comfortable.

Other Things You Should Know About Betta Fish Heaters

The pH Levels

Did you know that betta fish are at their best when they are living in water with pH levels between 6.8 and 7.5? You can make sure your fish have the right pH balance by keeping the water temperature in the right range. This is another reason why you don’t want the water level to drop below 75 degrees Fahrenheit. 

Just Like Home

You need to keep the betta fish tank’s water warm so it is closer in temperature to the water where these fish originate from. Bettas are native to Malaysia, Indonesia, Thailand, Vietnam, Cambodia, and Laos. All of these are very warm countries. 

The shade in their natural habitat helps to keep the heat in. When in nature, a betta fish lives in areas that are covered by shrubs and trees. That shade helps to keep a consistent heat for their environment, similar to what the heaters do for the tank.

Michele Taylor
Michele Taylor

Hello, fellow aquarists! My name is Michele Taylor, and I am a homeschool mother of six children, which includes five boys and one girl. Growing up, our family had a large aquarium with angelfish, goldfish, and lots of different varieties of neons.

7 Awesome Betta Fish Toys & Decor to Keep Them HAPPY!

Betta Fish Toys & Decor

You have just about everything your betta needs to be happy. You bought a perfect tank, which is at least ten gallons. You have a filter, a variety of live and other foods, and more. What else are you going to need? That is where toys and decorations become interesting.

To be clear, your betta doesn’t “play” with things the way your dog or cat might. They are territorial freshwater fish who generally like to be left alone. However, keeping these factors in mind doesn’t mean they don’t also like to do things. Believe it or not, but it is in fact very easy for your betta to become bored with the proper stimulation in place.

Betta Fish Toys & Decor

What Does A Betta Need To Be Happy?

Bettas have a pretty straightforward life. At the same time, we are talking about deeply intelligent, marvelously curious fish. In order to be truly happy, your betta needs the right temperature and pH, lots of healthy, yummy food, plenty of space, and toys and decorations that will appeal to their traits.

What Are The Benefits Of Toys And Decorations For My Bettas?

Bettas in particular love to explore. There are a number of live plant options which can meet this need beautifully. There are also toys that your betta will likely enjoy exploring. The right toys and decorations for your betta can go a long way towards keeping them stimulated, active, and content. Remember that bettas are not the most social fish around. In fact, to reiterate, they generally prefer to be on their own.

So, while bettas can live in harmony with other fish, you should make arrangements for your betta to be able to stay curious and engaged on its own. For example, bettas love to hide, as we mentioned. In doing so, you also give them the ability to get used to their surroundings more quickly. This also contributes to their wellbeing. In addition to hiding, bettas also like swimming in and out of those spots.

Bettas love to rest on plants, and you can actually use betta toys to train them to do fun tricks. This is a degree of stimulation they are also going to enjoy a great deal.

Which Toys Provide The Best Benefits

What Should I Keep In Mind When Shopping For Bettas?

Thankfully, there are lots of toys and decorations out there. We’re going to cover some of our favorites here, so keep them in mind, if you want to start with products that have a fantastic overall reputation for keeping bettas happy and excited.

In terms of shopping for the best betta toys and decorations, there are a few things you will want to keep in mind. Start with making sure anything you buy is a well-reviewed product from a reliable vendor.

As you will see from our list of the top betta decorations and toys, there is a nice variety of products to be found out there. Having said that, you should avoid anything with sharp edges. Bettas like to rub against surfaces sometimes, and sharp edges can naturally be problematic. You should also quarantine anything you purchase. Even two or three days of isolation for a new toy or plant can ensure it is stripped of anything harmful that can be transmitted to your betta.

In general, live plants are considered to be preferable to plastic plants. While plastic is perfectly fine, live plants tend to be more appealing to bettas. They also provide oxygen.

Which Toys Provide The Best Benefits?

Finishing up the basics of betta decorations and toys, let’s dive a little deeper into the concept of benefits to your betta. As we said, the right toys and decorations can provide your betta with a long list of benefits. Just remember that different toys are going to provide your betta with different benefits.

For example, both plastic and live plants provide exercise and hiding places. A laser pointer can be a thrilling toy for a betta, as it stimulates the kind of exercise they love. A plastic log can give your bettas a good hiding space, while also giving them something that can be used as a bubble nest later on for breeding.

Keep this in mind, as we run through our list of the best decorations and toys for betta fish. Your best bet will probably be to buy one or two toys and a couple of different decorations. Variety is always a surefire way to prevent boredom.

Let’s get to our list!

Best Toys & Decorations To Keep Your Betta Entertained Reviewed

Zoo Med Betta Leaf Hammock

One of the most affordable options on our list, the Zoo Med Betta Hammock provides many of the benefits we have discussed thus far. At its core, this product will give your betta a nice place in which to relax. Take a look at the hammock for yourself. You will see that it can also give your betta an excellent hiding spot.

Another nice thing about these is that they are fairly small. This means you can add one, or even several, and still have plenty of room to do more with the decorations and toys. They are extremely easy to connect to the tank. You also won’t have to worry about any sharp edges or dangerous materials. However, keep an eye on the metal ring, attached to the leaf. Also, since this is plastic, you aren’t going to be adding any additional oxygen to the aquarium.

Zoo Med Laboratories AZMBL20...
  • A naturalistic leaf hammock for your Betta to rest on

Luffy Betta Balls

Bright and colorful, these live marimo plant balls are another affordable way to not only add some aesthetic charm to the tank, but also as a means of giving your betta the exercise and attention they are truly going to enjoy. Simply set these balls along the bottom of the tank. They will float there without bothering anyone or anything. Your betta may even ignore them at first.

However, eventually, your betta is going to start to explore. Bettas love to explore Luffy Betta Balls. Furthermore, they are going to particularly love the fact that they can push them back and forth. This is a behavior your bettas enjoy in their natural state. These balls provide seemingly endless potential for enjoyment and stimulation.

Made from living moss, this is also a rare example of a live plant for bettas that does not require any maintenance whatsoever.

Luffy Betta Balls : Live...
  • BIG AND BEAUTIFUL ADDITION FOR YOUR BETTA --- These LUFFY Betta Balls are beautiful marimos that are a great addition for your betta’s tank. They are large, between 1.6 and 2-inches, and add color...

PetSafe Bolt – Automatic, Interactive Laser Cat Toy

As the name above tells you, this is a toy that is marketed towards dogs and cats. Fair enough, but why should they have all the fun? As it turns out, this automatic laser toy can be enormously beneficial to your bettas. A betta fish will absolutely notice the presence of a red dot on the glass, and in their line of vision. They will chase the red dot around. This is a good way to appeal to their curiosity, while also doing something that will give them lots of fun exercise.

While there are several different laser pointers on the market that can give you the kind of experience we are talking about, we are pretty partial to this specific product from PetSafe. Beyond the fact that it is incredibly affordable, this laser pointer is also easy to use and charge. It carries that charge for quite a long time, as well.

Just remember to keep it out of their eyes! You will also want to note that these laser pointers are generally not waterproof. Record some fun videos of your betta chasing the red dot around. They can make for a popular social media share!

Sale
PetSafe Bolt - Automatic,...
  • SAFE FOR PETS: The Bolt features a Class IIIa laser with a 5mW max power output for a safe play experience; requires 4 AA batteries (sold separately); for best performance, use only alkaline batteries

R2 Fish School Complete Fish Training Kit

One of the words we have mentioned over and over again in this article is stimulation. Your betta needs this stimulation to maintain its metabolism, stay healthy, and by association, happy. There are lots of different ways to achieve this. The most important thing comes down to making sure your bettas have a variety to some degree.

The R2 Fish School Complete Fish Training Kit is a great example of just how many different toys are available to you. The training kit works on two levels. It gives your bettas something in the way of physical exercise. At the same time, it fully takes advantage of the ability of the betta to solve problems. Bettas love to figure things out, and this product will allow them to do that in no uncertain terms.

As the name implies, this kit features several different activities. Your betta will be able to practice and play at fetching, shooting hoops, and even diving under and over bars. The versatility of this kit is quite frankly stunning to us. This can literally provide your betta with hours upon hours of entertainment. Over twenty-five different toys can be found on this single kit. You yourself will also find it easy to use this toy.

Some even say this is the only toy you’re going to need for your betta fish. We personally wouldn’t go that far. At the end of the day, you still want to meet the needs of your betta to have a good variety of toys to keep them entertained and engaged.

R2 Fish School Complete Fish...
  • Includes a 45 minute detailed instructional DVD featuring world famous fish trainer Dr Dean Pomerleau

Zoo Med Cermaic Betta Log

As we mentioned earlier, bettas love logs for several reasons. It gives them a nice place to hide, but it also provides them with the space to hide and even explore the log. We mentioned Zoo Med earlier, and this is definitely one of the best companies making decorations and toys for betta fish.

This Zoo Med Ceramic Betta Log will sink right to the bottom of the aquarium. It isn’t going to take your betta very long to start exploring! Don’t be surprised either if you start to see your betta sleeping in the log. This is a simple product, but it really does come with the potential to serve so many viable uses. This is also yet another toy that isn’t going to take up too much space. The example we are providing is considered to be a small. You can find larger ones, but remember you don’t want to clutter up the tank too much. Overwhelming the aquarium with plants and toys can actually start to stress out your poor betta.

Your betta may even start to use the log to build bubble nests. If this happens, then you can be sure your betta is truly happy!

Make sure the edges of this ceramic log are not too sharp.

Sale
Zoo Med Ceramic Betta Log...
  • Zoo Med Laboratories Sinking Ceramic Betta Log

Indian Almond Leaves

If you’ve done enough research on how to take care of bettas, it stands to reason that you have come across references to Indian almond leaves somewhere in all of that information. Many would consider them to be essential components to any successful or thriving betta fish environment. When you consider the benefits of Indian almond leaves for betta in full, it is difficult to disagree with that opinion.

In the first place, Indian almond leaves offer the shelter component that your bettas absolutely love and absolutely need. They also like to explore and swim around the leaves. This gives them that benefit of exercise that we have been talking about.

All of this amounts to reducing their overall stress levels, as well. This need should be at the heart of many of the decisions you make about your betta. Are they making your betta happy? Do they help them to achieve a consistent state of calm?

The final benefit of Indian almond leaves worth mentioning? They provide unique minerals and other nutrients while floating around in the tank. These leaves can contribute something very significant indeed to the overall health and comfort of the bettas.

Your bettas will use these leaves to relax. They may also use them for light nibbling, or even as a place to lay their eggs. Neither of these behaviors are unusual. This is just more fuel for the opinion that Indian almond leaves should be somewhere on your shopping list.

Sale
SunGrow Indian Almond Leaves...
  • ✔ INDUCE BREEDING --- SunGrow Betta Leaves are a must-have for taking care of Betta fish. They act as a shelter to betta, release minerals for their healing, and assist Betta in spawning. They also...

Ping Pong Balls

Yes, you read that correctly. Something as simple as a set of ping pong balls can in fact give your bettas hours and hours of pleasure. You don’t need to purchase a sixty pack, as we’ve mentioned. All the same, ping pong balls are a blast for bettas for one specific reason.

How do betta fish hunt in the wild? They tend to hunt from the surface of the tank. The ping pong balls floating along the surface are going to connect your bettas to their natural hunting instincts. They will almost certainly feel compelled to stalk and attack the balls. It isn’t hard to see how these ping pong balls can be a great way to ensure your bettas are getting as much exercise as possible.

One of the keys to making your betta happy is to give them a home that gets as close to their natural environment. This isn’t just something you can approach with the toys you buy, or the live plants you add to different parts of the tank. This also applies to eliciting instinctive responses from them. Believe it or not, but few things you can buy are going to be as successful on this front as ping pong balls.

KENTLI 60Pcs/Pack Colored Ping...
  • Material: 100% Environmental New Material - PP Plastic - No Smell, Harmless to Body.

Plastic And Live Plants

We’ve touched on plastic and live plants in not only different parts of this article, but in some of our actual suggestions. Let’s wrap things with an overview of the different live and plastic plants that can be added to your aquarium. The plants themselves can lend loads of atmosphere to the aquarium. At the same time, they can give your betta hiding places, spots to build nests, areas for sleeping, and areas for exploring/playing. It is important to that end to make sure you’re choosing plants that will benefit your bettas in the most appealing fashion possible.

Live plants provide a number of unique benefits that plastic plants do not. Weigh the pros and cons of each carefully. For instance, live plants also require considerably more in the way of maintenance. There is a case to be made for either choice. As long as you can meet the basic needs of your bettas as we have outlined them throughout, you can really choose just about anything you please.

Here are a few different live plants and plastic plants that are worth researching further:

  • Java moss
  • Java fern
  • Amazon Sword
  • Anacharis
  • Hornwort
  • Wisteria

Conclusion

Clearly, as we mentioned earlier, you are not going to be lost for options for ways to keep your bettas entertained and content. While you don’t have to purchase every single thing on this list, you can achieve a lot by picking 2-3 items you really like. Remember that if you haven’t bought your betta yet, you may want to quarantine the toys and decorations themselves, whenever possible.

At the very least, remember that your betta will almost definitely need some time to acclimate themselves with their new space. Give them some time to get used to things, before you make any replacements.

Gabriel R

Gabriel R

Welcome to Aquarium Fish City(AFC). I’m Gabriel and I have been keeping fish for almost fifteen years. My father was a huge fan of tropical fish and our childhood home had a huge aquarium which he tended and kept hundreds of species of fish over the years. I was always fascinated by our fish tank and would spend hours staring at the fish. They seemed to all have different personalities and would interact differently with one another. Here, you can find out everything you need to know about keeping fish and aquarium maintenance.

Betta Fish Plants: The 10 Most Live and Fake Popular Options

Aquarium-betta-fish-plants

What are the essentials of any betta fish aquarium? Obviously, you need food, the proper amount of treated water, and of course, beautiful bettas. There are also a wide range of plants you should consider. For a variety of reasons, the right kinds of plants can be invaluable for your betta.

You may not even know if betta fish like plants. They do! There are tons of different options for live plants that your bettas can enjoy and use in several different ways. We’re going to cover the best plants for betta fish. We can even touch on the possibility of fake plants your bettas may enjoy.

First, let’s break down exactly why bettas love plants in the aquarium. This is not merely a matter of putting some appealing décor in the tank. Atmosphere in the aquarium is nice, to be sure, but there are in fact several reasons why plants are good for betta fish.

Aquarium-betta-fish-plants

Do Betta Fish Really Like Plants?

In a word, yes!

Betta fish love plants for a range of reasons. While you want to be careful to choose the right plants for your betta tank, there are several universal benefits to doing so that are well worth keeping in mind:

  • They offer hiding places: Betta fish are notorious for not being the most social fish in the aquarium. Even among their own species, they prefer to be left alone for the most part. They are significantly territorial and tend to prefer as much territory as possible to that end. Dense plant life, and perhaps even a cave, can offer your bettas a wonderful way to keep to themselves as they see fit.
  • They give your tank a more natural atmosphere: Let’s consider the natural habitat of the betta fish. One key component to that habitat is the presence of plants along not only the surface of the water, but in the water itself. Such plants provide shade, as well as relief from the sun. You also get the personal benefit of an aesthetic that matches where you would actually find bettas in nature.
  • They provide your betta with hours of entertainment: You may not have known this until now, but bettas can actually get bored in the tank. This can cause them to act out, become stressed, and more. Plant life can offset this boredom to a meaningful degree. Bettas by and large love the ability to explore. Giving them a rich plethora of plant life in the aquarium will allow them to do exactly that.

Remember: Bettas like to hide, and they love to be able to explore. Look for plant life that will give them both of those perks in no uncertain terms. There are thankfully quite a few different examples of plants for betta fish that you can explore.

Before we get to our list of the 10 best plants for betta fish, let’s consider the subject of live plants vs plastic plants. Some would argue that there is no difference between the two. We don’t want to go quite that far. Plastic has potential, but there are several things you will want to take to heart first.

Plastic Plants vs Live Plants: Which Is Better For Bettas?

Some betta experts swear by live plants for their tanks. Others argue that plastic will accomplish the same thing, but without the annoyances of dealing with live plants. Others still will claim there really isn’t much of a difference, as far as your betta is concerned.

The truth of the matter is that both types can be suitable for a betta fish tank. Your betta will ultimately enjoy either option.

Live plants can cut down on tank maintenance, but they themselves are going to need more maintenance than plastic plants. Which one should you choose?

  • Live Plants: They bring much-needed oxygen, beneficial bacteria, and can even kill harmful things like algae. They also have the built-in benefit of looking natural. To a lot of people, plastic plants still don’t bring that element. On the other hand, they require a lot more maintenance and attention. They also contribute problematic decaying matter to the tank. Finally, too many live plants can actually reduce the oxygen available to your betta.
  • Plastic Plants: While perhaps not as organic in appearance as live plants, plastic/fake plants nonetheless look quite nice. Plastic plants require virtually no maintenance, are easy to clean, and do not come with their own unique demands for lighting and water. On the other hand, plastic naturally poses a minor potential danger to the fish. They also do not absorb c02, part of their process of putting oxygen in the tank.

So, at the end of the day, it’s up to you to weigh the pros and cons of each choice.

So, Which Specific Plants Are Ideal For Betta?

At this point, you have all the background you need to start looking at specific plants. While you can obviously use this article as a guide, we would still suggest doing more research on any specific plant you are going to consider. What matters is finding something that meets not only your needs, but the needs of your bettas, as well.

Before we get stared on our list with the ever-popular Java Fern, keep in mind that plants for bettas can be broken down into two categories. There are submerged plants, such as the Java Fern and Java Moss. There also floating plants. Hornwort would be one such example, although it can also be planted.

Java Fern

Java Fern

Native to Southeast Asia, the Java Fern can be found on rocks, and elsewhere throughout a range of freshwater areas. One of the biggest benefits to having this plant in your tank is the fact that it is remarkably easy to care for. In fact, it is perhaps the easiest. At the same time, it gives you all of those benefits that we discussed with live plants for bettas.

We also like the fact that they can be grown easily in or out of water. Want more? Simply split and plant a rhizome.

Keep in mind these plants are big growers. They can reach thirteen inches in height and eight inches in width. The pH should be between six and seven. The temperature should be sixty-eight to eighty-two degrees Fahrenheit.

Sale
Java Fern Bare Root |...
  • You get 1 young Java Fern bare root of approximately 4-6" in height.
Java-Moss

Java Moss

A valuable member of the Hypnaceae family, Java Moss is noted for its beauty and toughness. You don’t have to particularly worry about lighting or temperature with this popular example. Attaching itself to a given surface, people love the many beautiful leaves it can produce over time. It can even grow on the walls of your tank, which is a particularly popular effect for many betta fish owners.

Trimming Java Moss with ease is another benefit. This is a great plant for anyone who wants to be in complete control of creating the proper atmosphere inside the tank. Combine this with the fact that they endure temperatures up to eighty-six degrees, and you have a plant that looks beautiful under virtually any circumstances. Like the Java Fern, it may need an anchor when added to the tank.

Live Aquarium Plants Java Moss...
  • Real Solid Java Moss: Bright green authentic Java moss that will give life to your aquarium.You may also do it yourself to create different shapes of Java moss that will change and enhance aquatic...
Hornwort for betta fish tank

Hornwort

Despite the funky-sounding name, Hornwort is in fact a pretty straightforward plant. This is an example of a plant that is known as an invasive species. In other words, it can quickly overwhelm the space, if you don’t pay attention. It is because of this aspect that Hornwort can be found all over the world.

In other words, Hornwort is going to need a little more attention than the other entries we’ve covered thus far. It’s going to require a large tank, given the fact that it can grow to heights of ten full feet! The temperature falls between 59F and 86F. The ideal pH level is around seven.

Originating in South America, bettas love nothing more than to hide among its leaves. Just keep an eye on its growth!

3 Hornwort Bunch Plants for...
  • IMPORTANT: Please note that during times of extreme weather, live plants will suffer due to extreme temperatures. During winter, do not order live plants when temperatures are expected to go below 20F...
Anacharis for betta fish tank

Anacharis

Another interesting name for a very interesting plant, Anacharis is also known as Elodea densa. That name can also give you a clue as to the type of plant we’re talking about. Anacharis is a plant that grows very quickly, while also providing tons of density that your bettas are going to absolutely adore. This means you will want to make sure you are trimming the plant on a regular basis. It does require a meaningful amount of attention.

This is also another plant that comes with the options to either float it along the top of the tank, or plant it closer to the bottom. Your betta will be pleased either way. The pH should be as neutral as possible, with temperatures between seventy and eighty degrees Fahrenheit.

Pond Oxygenating Elodea...
  • IMPORTANT: Please note that during times of extreme weather, live plants will suffer due to extreme temperatures. During winter, do not order live plants when temperatures are expected to go below 20F...
Amazon Sword for betta fish

Amazon Sword

With long, gorgeous, blade-like leaves, the Amazon Sword has an appearance as dynamic as its name. This is a wonderful plant to add for the simple sake of variety. It is one of the most unique-looking plants we’re going to cover in this article.

The blades themselves can reach heights of up to fourteen inches. They give an appealing bushy appearance inside the tank, and the dark green can offer a vibrant touch to the lighter greens of some of the other plants covered. They provide a very nice hiding space for bettas. The ideal temperature is somewhere between seventy-two and eighty-two Fahrenheit, and the pH level can be anywhere from 6 to 7.5.

One nice thing about these plants is that they don’t require a ton of maintenance. Unlike some of our other options, they do not need trimming.

Sale
Large Amazon Bleheri Sword...
  • Easy live aquarium plant specie for any freshwater aquarium
Anubias Nana in batta fish tank

Anubias Nana

One thing to keep in mind with our sixth entry is its size. Given that this plant is relatively smaller than many of the options we’ve covered here, the Anubias Nana is a great live plant choice for those with smaller tanks.

Originating in various locations throughout the African continent, the plant is noted for its hardiness, and for the fact that it only grows to about 7.5 inches in height. As long as it can maintain access to a minimum of light, you shouldn’t have to really worry about it. The pH levels should stay around six to 7.5., and the temperature needs to be between seventy-two and eighty-two Fahrenheit.

This is a perfect live plant choice for those who consider themselves to be beginners.

Potted Anubias Nana Aquarium...
  • PLEASE READ BEFORE ORDERING: Please note that during times of extreme weather conditions, live plants will suffer due to extreme temperatures. During winter, do not order live plants when temperatures...
Water Wisteria for betta tank

Water Wisteria

The Water Wisteria plant is another stellar choice for those who aspire to something more unique for their betta and for the aquarium. The pH level can be between 6.5 and 7.5, while the ideal temperature can be anywhere from seventy-five to eighty-two degrees Fahrenheit. It can be found throughout India, including in various spots throughout Nepal.

Bettas love the lush hiding places this plant will provide for them. You’re going to love the absolutely stunning greens that this plant can emit. It doesn’t require too much care, particularly when compared to other plants on the list. However, it will need a certain amount of trimming. You also want to make sure it is getting a good amount of light from one day to the next. The trimmings can be used to make more, as well.

Greenpro | Water Wisteria...
  • LIVE AQUARIUM PLANT | 3 Bunch package. Water wisteria or Water Sprite is easy for beginners. They can be grown tall and stems can be replanted.
Duckweed for betta fish

Duckweed

Another decidedly hardy entry for the list, Duckweed has a mossy-look to it that can really add a visual flair to your freshwater betta tank. This is a flower plant that grows along the surface of the water. It doesn’t have the same benefits as some of the other plants we’ve covered, but there is still a lot to like about it. For example, the ideal temperature is on par with everything else we’ve discussed. The same can be said for the pH levels, which can be anywhere between 6.5 and 7.

Your betta will use them to hide when they are stressing out. The range of nutrients taken in by the plant also makes it a very good choice indeed for those who want the healthiest possible tanks.

Duckweed (Lemna Minor) -...
  • Live Duckweed (Lemna Minor) Plants

Betta Bulbs

Named after their biggest fan, Betta Bulbs also go by the name of the Aponogeton Ulvaceus Bulb. Whatever you choose to call them, understand that we are talking about one of the most visually dazzling live plants for your aquarium. Betta Bulbs are particularly popular with bettas. They love using them for a hiding space. They are also a good plant for helping the betta to define its crucial territory.

The pH level ideally suited to these bulbs is between 6.5 and 7.5. The ideal temperature will be somewhere in the vicinity of seventy-two to eighty-two Fahrenheit. The bulbs themselves can come from such locations as Africa, Australia, and Asia.

Low lighting is considered to be the best choice for these bulbs. It allows them to thrive, while also limiting their growth. That means cutting down on the amount of maintenance they often require.

Aponogeton Ulvaceus Bulb -...
  • You will get 1 Aponogeton Ulvaceus Bulb ready to place in your aquarium. Grows when water temperatures are between 65-72F. PLEASE NOTE THAT THEY WILL NOT GROW IF WATER TEMPERATURE IS OVER 72F.

Plastic/Fake Plants

While it may not seem fair to lump all fake plants under a single entry, we are essentially talking about the same thing, no matter which specific example one might cite. Remember that when it comes to plastic plants, you don’t have to worry about trimming, or any of the other forms of maintenance that are associated with live plants. Cleaning plastic plants is a breeze, and they can be added to or removed from the tank in a matter of moments.

Really, if you do opt for plastic plants, your choices will really just come down to meeting your needs, as well as the needs of the betta. They like plants that give them plenty of space to hide and explore. You also want to be sure you’re buying plastic plants that are proven to be safe to add to the tank. This means carefully reviewing any specific examples you come across.

If you’re in need of some fake plant inspiration, check out below list of the top 3 fake plants for betta fish. Just remember that fake plants can potentially hurt bettas, as they like to sometimes move against the plant. You’re also not adding anything in the way of oxygen or natural beauty to the tank. On the other hand, they are considerably easier to shop for.

Still, you should be able to find all of these plants in a variety of online and physical store locations.

Bestseller No. 1
Lantian Grass Cluster Aquarium...
  • Overall height: 23 inches.
Bestseller No. 2
MyLifeUNIT Artificial Seaweed...
  • MyLifeUNIT Aquarium Seaweed Plastic Plant, made of eco-free non-toxic pvc material, ceramic base, won't contaminate water, color won't fade
Bestseller No. 3
QUMY Large Aquarium Plants...
  • Dimension: 15.7" x 7.09"(H x W); Base Size : 3.15"

Conclusion

With everything above, you’re in a great position to explore the benefits of plants in betta fish tanks. Live plants keep the tank looking natural, provide oxygen under the right circumstances, and can keep your betta consistently entertained. There is also the ever-necessary advantage of also giving your betta safe places to hide. Without such spots, their stress levels can rise dramatically. This can lead to a variety of health problems.

Again, make sure to fully research any specific plants you are choosing. While they share many benefits, they also share differences you need to observe. For example, the Hornwort plant we covered above requires larger-than-normal tanks. You do not want to put this plant in a tank that is any smaller than fifteen gallons.

Gabriel R

Gabriel R

Welcome to Aquarium Fish City(AFC). I’m Gabriel and I have been keeping fish for almost fifteen years. My father was a huge fan of tropical fish and our childhood home had a huge aquarium which he tended and kept hundreds of species of fish over the years. I was always fascinated by our fish tank and would spend hours staring at the fish. They seemed to all have different personalities and would interact differently with one another. Here, you can find out everything you need to know about keeping fish and aquarium maintenance.

Crowntail Betta 101: Get The Facts On Owning And Caring

Crowntail Betta

Celebrated the world over for stunning caudal fins, the Crowntail Betta fish can make for a wonderful addition to your aquarium. These are some of the most popular types of fish to be found anywhere in the world. It isn’t hard to see why. We are looking at bright, lovely, and decidedly intelligent creatures. Your Crowntail Betta can prove to have a personality all its own.

Crowntail Betta

Interested In Owning A Crowntail Betta?

At the same time, owning and caring for a Crowntail can have its own unique challenges. If you are new to the world of betta fish, or just new to Crowntails specifically, there are several things you need to keep in mind. This begins with making sure you’ve chosen the right aquarium and equipment. It also means knowing how to feed and care for your Crowntail from one day to the next.

While not significantly difficult to take care of, knowing what they like to eat, signs of illness to watch out for, and the best products to buy can ensure your Crowntail is happy for many years to come.

Where Do Crowntail Betta Fish Come From?

Also known by the behavioral name of Siamese Fighting Fish, the Crowntail Betta is a visual wonder. People become utterly enchanted with their beauty, particularly in their fins. Ancestors of these fish can be traced back to countries like Thailand, Malaysia, Indonesia, and Vietnam.

Beyond the stunning fins and quick, intelligent eyes, Crowntail Bettas are also known for pretty aggressive behavior. If you are a beginning hobbyist with bettas in general, understand that Crowntail Bettas are likely going to be the most aggressive fish you have ever owned. This can create potential conflicts with other types of fish in the tank, if you have any.

Before making any purchasing decisions with regards to bettas, make sure they are going to be suitable mates with anyone else you might have in your tank. There are quite a few different fish which can work with Crowntails just fine.

The Basics On Crowntail Betta Fish

First bred in 1997, the Crowntail Betta has skyrocketed in popularity in the years since it was first introduced to the world. You can always spot a Crowntail Betta fish by paying attention to the largeness of its fin extensions. The fin itself, as we mentioned earlier, is considered to be its most appealing feature. It can be an utterly stunning blend of vivid reds and deep blues. Their colors are evocative of everything we love about marine life.

Here are some basic facts about Crowntail Bettas, before we get more deeply into the subject of personality and other traits:

beauty-Crowntail-Betta
  • The Crowntail Betta was first identified by the name Cupang Serit at the IBC (International Betta Congress).
  • They tend to hit their growth peak at around 2.5 inches. However, in some cases, they can become as large as 3 inches. The larger ones are considered to be particularly appealing specimens for breeding and ownership.
  • Crowntail Bettas have a lifespan in the neighborhood of approximately two to three years. This is considered to be the norm for tropical fish in this size range.
  • Typically, a Crowntail Betta is going to cost anywhere from five to thirty dollars. This is going to be dependent upon the reputation of the breeder, the quality of the fish you are buying, and many other factors. When buying Crowntails for the first time, it is important to do as much research into the subject of breeders and dealers in your region as possible. You want to be sure you’re buying a Crowntail Betta fish from a highly respected source.
  • Generally speaking, the male Crowntail Betta is considered to be the more beautiful of the two genders.
  • In terms of physical appearance, there are a few things to keep in mind. Start with the fact that their fin extensions can reach up to eight inches in diameter. You will also notice a minimal amount of webbing among the rays on the fins of the Crowntail. This is where the crown-like appearance comes from. The tips along their fins have a spiky appearance that many find charming. You can find them in a variety of different colors, but blues and reds tend to be the most popular.
  • The Crowntail Betta is just one example of a betta fish being bred for unique fin colors and features. Other examples include the Spade Tail Betta and the Half-Moon Betta. Don’t be afraid to shop around to find a color and style that grabs you.

Now, let’s discuss the typical behavior of the Crowntail Betta Fish.

Crowntail Betta Fish Personality Traits

While domesticated betta fish are relatively more subdued than their in-the-wild counterparts, we are still talking about one of the most aggressive types of fish you could ever introduce into an aquarium. In their native countries of Thailand, Malaysia, and elsewhere, they are known as Siamese Fighting Fish for a reason! Their fights can be intense. Many breed Betta fish specifically for what they have to offer in this particular area.

Remember: Throughout Southeast Asia, people love to catch and pit betta fish against one another. It is a highly competitive sport, and this emphasis on aggression carries over to every type of betta fish imaginable. You will certainly experience this when you bring one home.

Typically, the Crowntail Betta does not get along with others. It can be fairly territorial, and they generally seem to prefer to be left alone.

Again, it is well within the realm of possibility for Crowntails to live in harmony with other types of fish, but you should still keep their personalities in mind. Crowntail Betta males tend to be the more aggressive of the two, but don’t discount a feisty female by any means!

A Final Word About Crowntail Betta Fish Breeders

At this point, you’re ready to start shopping for a Crowntail. Keep in mind what we suggested earlier with regards to a breeder or seller. You can find Bettas of all shape, sizes, and colors at most major pet stores. There are even online options.

Many longtime hobbyists will tell you that their preference is to go to dedicated breeders. These individuals tend to have the highest quality Betta, which is also reflected in the typical prices. Going through a reputable breeder ensures you’re getting exactly what you want.

Getting Your Crowntail Betta Fish Tank

The first step in bringing a Betta fish home is to get the right tank. Some people will tell you that five gallons is just fine for a Betta. While they will ultimately be fine in such conditions, what you really want to do is invest in something in the ten to twenty-gallon range. In smaller tanks, your Betta can become unhappy from crashing into the glass all the time.

20-gallon tanks are particularly a good idea when you’re planning to buy more than one. Don’t forget that Crowntail Bettas prefer to be alone. They are territorial by nature, and that territory needs to be fairly expensive to keep them happy. Larger tanks also give you the ability to add the kind of vegetation that will really appeal to them.

At the end of the day, our suggestion is to go with a 20-gallon tank. Even if you aren’t planning to get any more fish for the foreseeable future.

As you check out the best plants for Betta fish, make it a point to purchase both Indian Almond Leaves and a sturdy tank lid. As far as the lid is concerned, this is to ensure your Crowntail never jumps out of the tank. Yes, Betta fish really do love to jump out of the water. While doing so won’t instantly kill them, it is still obviously a situation you’re going to want to avoid.

The Indian Almond Leaves add a variety of natural, highly beneficial acids for your Crowntail.

What Are The Optimal Conditions Of A Crowntail Betta Fish Tank?

Betta fish in general are pretty tough. Having said that, there are still several factors concerning ideal tank conditions you’ll want to keep in mind.

Remember always that Crowntail Betta Fish are freshwater fishes. This thought should lead not only the conditions of your tank, but any potential tankmates you may consider later on.

The first thing you need to do is make sure the pH levels are ideal. This ranges from 6.4 to 7.0. Anything lower or higher than that can be highly damaging to your Betta. You should aspire to a water hardness of two to five carbonate hardness, which is expressed as dKh. The water temperature needs to be in the range of seventy-six to eighty degrees Fahrenheit. Again, any variation to this can result in stress and other problems for your Crowntail. It can cause significant damage to their metabolism, which can spiral into other health issues.

Keep an eye on these tank conditions at all times. Floating plants can also be a good addition to any tank. This is due to the fact that Crowntails love to use them in the creation of what are known as bubble nests. As far as Betta Fish are concerned, bubble nests are highly important. They are particularly vital for mating purposes.

In terms of specific numbers, you’re going to have to do a little trial and error. Keep in mind the suggestions made above, and don’t be afraid to make minor adjustments within that range, should the need arise.

Gravel or certain types of sand are fine for the bottom of your tank. Some even opt to not put anything down there at all. This option certainly cuts down on tank maintenance. At the end of the day, your betta is going to be fine with any of those. If you want to replicate their natural surroundings to the letter, you’re going to want to go with sand.

For tank lighting, dimmer is always better. Crowntail Betta Fish do not like to be exposed to bright lights. This can put considerable strain on them, leading to a variety of health conditions.

Betta splendens crowntail

A Final Word On Compatibility And Other Fish

While some prefer to keep Betta Fish to themselves, many believe they can make for fine tankmates for a variety of other freshwater fish. It really comes down to making sure you’ve created the best possible conditions for everyone involved.

After all, as we’ve said, Crowntail Betta Fish are happier when left alone. They need a significant amount of space. They can behave very aggressively towards any other fish, including other Crowntails, who happen to get into its personal space. You do not want to overcrowd the tank. At this point, you’re going to want at least a twenty-gallon tank.

You generally do not want to have more than one male Crowntail Betta Fish in your tank to begin with. Doing so can create a hostile atmosphere. In all likelihood, they are going to simply fight one another, until one of them dies.

Guppies, frogs, shrimp, and neon-tetras in general are all good tankmates for a Betta. Anything that might mirror its own behaviors, particularly with regards to aggression, is not a good idea.

The Ideal Diet For Crowntail Bettas

Diet is obviously very important for your Crowntail Betta. Being carnivores, you want to make sure the diet is highly reflective of the fact that they need lots and lots of protein in whatever they eat.

Pellets for Bettas are generally fine. However, if you really want to give them the very best, make sure to feed them a steady diet of frozen and live foods. We’re talking about stuff like bloodworms, brine shrimp, mosquito larvae, white worms, insect larvae, and more.

The best way to feed your Crowntail is to give them a good variety of things. Always research not only the products you’re purchasing to feed your betta, but also where those products are coming from.

Conclusion

Crowntail Betta fish can make for a wonderful addition to your home. They are a vastly rewarding, wholly unique companion.

Gabriel R

Gabriel R

Welcome to Aquarium Fish City(AFC). I’m Gabriel and I have been keeping fish for almost fifteen years. My father was a huge fan of tropical fish and our childhood home had a huge aquarium which he tended and kept hundreds of species of fish over the years. I was always fascinated by our fish tank and would spend hours staring at the fish. They seemed to all have different personalities and would interact differently with one another. Here, you can find out everything you need to know about keeping fish and aquarium maintenance.

Breeding Betta Fish 101:Everything You Need To Get Started

Breeding-Betta-Fish

Owning one or several betta fish can be a truly joyous experience. It can lead to the desire to begin breeding them. This can be done for strictly personal reasons, but some do take their breeding plans to the point of wanting to also sell them. While we can’t speak to one of those modes being superior to the other, we can say that when it comes to breeding betta fish, you are talking about a highly rewarding, extremely challenging endeavor.

Breeding-Betta-Fish
Bojan Žavcer

Why Do You Want To Breed Bettas?

As you might be able to imagine, there are many different factors to weigh. These factors can also be determined by why you want to breed them in the first place. Some breed to achieve a particular or even fin shape. Others breed specifically with the intent to sell. Knowing which path that you want to start off on can go a long way towards making sure you encounter as few hiccups as possible.

A Word Of Caution On Breeding Betta Fish

Make no mistake: While breeding bettas can be fun, even profitable (let’s not forget those who breed betta fish for show), it can also be fraught with challenges. There is a potential for trial and error that you may need to accept now. You can be successful at betta breeding right out of the gate, but many find it takes some time to get a knack for it.

You can eliminate a considerable margin for error by doing as much research ahead of time as possible. That’s where this article becomes useful. We’re going to cover everything you need to get started, regardless of your ultimate goals with breeding. You may want to read up additional articles and books, depending on what you would like to accomplish as a betta fish breeder.

At the end of the day, we would suggest starting small. Having a long-term goal is fine, and you can set off at any pace you please. However, as a newcomer, it makes more sense in terms of time, money, and the necessity of building experience to start breeding on a small scale. The choice is ultimately yours.

Getting The Best Tank For Betta Breeding

The first step is to establish permanent dwellings for your males and females. Here are the essentials that you’re going to need to keep in mind:

  • You’re going to need two tanks. At the very least. It is not a good idea to raise your fry (baby bettas) in the same tank with the males. At worst, the males will see them as a threat. They may also be devoured. You will need one tank for a permanent home, and then a second tank to handle your breeding efforts. For your two tanks, we should suggest something in the 10-20-gallon range. 10 is just fine, but 20 might be better for more ambitious first-timers. Do NOT opt for any tanks smaller than 10 gallons.
  • Before you set out to buy your fish, make sure you’ve cycled both tanks thoroughly. This is not difficult to do, but should be taken care of first and foremost.
  • Make sure you also have all of your equipment ready before buying bettas, as well. In a moment, we’re going to show you a comprehensive shopping list to that end.

Essential Equipment For Betta Breeding

Let’s take a look at the equipment you’re going to need:

  • Tanks: To reiterate, you want at least two. You may want a third to separate bettas in special situations, such as one who has become sick, but that’s entirely up to you. Make sure all of your tanks have lids, as well.
  • Submersible Water Heater: A 25-watt heater will allow you to reach and maintain your ideal temperature.
  • Seasoned Sponge Filter: You want to keep your water clean, but you also don’t want a filter so powerful it can potentially scatter about the eggs.
  • Air Pump: This piece of equipment will be responsible for gently moving water from the tank to the seasoned sponge filter.
  • Cover: There are a few different options in this arena. Some choose a glass top to create a humid environment, but not so much that the water gets too warm. Others prefer plastic wrap, although this considered to be problematic for at least a couple of reasons. Some even believe you don’t need a cover. Perhaps not, but you will lose more water to evaporation, so you’ll need to account for that.
  • Plant life: This gives your betta fish places to hide, rest, and it simply adds texture and personality to the tank. There are a number of different options that are worth exploring.
  • Indian Almond Leaf: These products are designed to soften your water. They also give your males the much-needed ability to build what is known as a bubble nest.
  • LED Lighting: These should be kept along the top of your tank. Make sure you purchase lights that can be controlled.
  • Tank Divider: When the time comes, the tank divider will ensure your bettas can get to know each other, but not in a way that risks their health and/or lives.

Keep in mind as well that all of the suggestions we’ve made for products are merely that. Research all of these items, and find specific products that will match your needs and budget.

At this point, you are decidedly ready to shop for and choose your bettas for breeding. This is where things can get challenging, but there are a number of tips and suggestions that can help you navigate your needs and possibilities.

How To Choose The Very Best Betta Breeding Pair: Pet Store Or Breeder?

It is not hyperbolic to suggest that this is the most important part of understanding how to successfully breed betta fish. As a beginner, you will find yourself looking at two distinct ways to buy bettas for breeding.

On the one hand, you can go to a pet store. On the other hand, you can get what you need through a reputable breeder. Our suggestion is to go for a breeder, and to find one as local to you as possible. Breeders give you a wider array of choices. This can be vital for situations in which you want to breed for certain types, colors, or fin shapes with your betta.

A pet store, even a chain like Petco, can make getting started pretty straightforward. If you simply want to get a handle on breeding, you can find everything from a single store. They also tend to be a little cheaper, when compared with a breeder, but this can be offset by the numerous benefits of choosing someone who has a focus on bettas. You can even buy betta fish these days.

Still, a local breeder means working with someone who is truly passionate and knowledgeable about bettas. You also stand to get the healthiest possible bettas, and perhaps even someone who can help you with other aspects of the enterprise.

How To Choose A Male Betta For Breeding

Careful consideration should be made with regards to choosing both the male and female you would ideally like to breed.

In terms of males, energy is one of the first things to look for. A male betta with poor energy levels will be seen as weak, possibly disease-filled by the female. The odds of the female choosing the male, based on this criterion alone, can drop dramatically at this point. You want an energetic male for breeding purposes.

Coloration is something else females are going to be looking for. While you are free to choose any colored betta you please, keep in mind that females tend to pick the brightest-hued examples. This is because such color indications good health, which also means they are a good forager. The brighter, the better is seemingly a rule of thumb, as well. One study suggested females were more apt to choose males with red coloration, as opposed to those with blue coloration.

Finally, we come to the fins. This is arguably one of the most important aspects of choosing the best male betta fish for breeding. You generally do not want bettas with damaged fins. This is another indicator of the probable health of the male to the prospective female. If they are a good forger, and if they have good energy, their fins are going to be strong and distinctive-looking. Such fins will also heal very quickly after suffering damage. This is generally no more than a couple of days.

Females also like a male betta with strong fins because it suggests they are good fighters.

How To Choose A Female Betta For Breeding

The truth of the matter is that female bettas for breeding are a little easier to choose, in terms of what you need to keep in mind while shopping. You still want a strong, healthy female. For this reason alone, it can be a good idea to choose legitimate betta breeders.

Females need to be strong. Beyond that, you really only need to choose one based on the personal criteria you are trying to achieve. In other words, based on the physical traits you may be trying to recreate in your fry.

Interestingly enough, female bettas can live together just fine. Males are going to compete with each other for space and mating opportunities. Not that you want your bettas to fight too much, but females do tend to choose males that win such fights.

A Few More Important Things About Choosing Your Breeding Pair

We cannot stress this enough: Buy from a reputable breeder! Anything less than the best almost certainly results in poor breeding results. At best, you’re going to be disappointed. At worst, your bettas will be dead.

The bettas will be anywhere between four and twelve months old, when you set about your task. Regardless of when you get your breeding pair, they’re still going to need about a month to get settled in.

Establishing The Best Conditions For Breeding Bettas

Time to set up the breeding environment! Here’s what you’re going to need to do:

  • Get your bettas ready. It will take at least two weeks for them to become comfortable and optimally healthy in their surroundings. It is better to wait for a month. This allows the female to build up their strength and eggs, as mating is rather stressful on them. You should also use this time to get them on a good live food diet. You’re also using this prep time to keep an eye out for any of the common betta fish diseases.
  • Get the breeding tank set up. This should be done in an area where your bettas can have peace and quiet from noise and any brightness. After filling the tank with three to five inches of water, add the sponge filter and air pump. Fully submerge your heater, and then tape the almond leaf to the front of the tank. Add your plant life. Leave the tank to settle for at least twenty-four hours.
  • Put the female in the breeding tank. This would be a good time to use the tank divider. Your female should be left alone to hang out in the tank for around thirty minutes.
  • Introduce your star-crossed lovers. Add the male to the tank. When the male becomes aware of the female, expect them to start turning deeper colors. Vibrant fin displays are something else to look for. The female will respond positively by turning a darker color, and by displaying vertical stripes along her midsection. You will be able to see the ovipositor a small speck of white between both ventral fins. The more your female flares up and waggles about, the more interested they are in your male as a breeding partner.

Look for the bubble nest. If the initial introduction has been good for all parties concerned, the male is going to start building a bubble nest. They will alternate between doing this and continuing to show off. Separate them for the evening.

Once Betta Breeding Begins

Once they’re back together, the female will check out the bubble nest. You want your female to be impressed. The male in turn will begin showing off even more. They will also probably start chasing the female around the tank.

Keep the heat and humidity inside your tank, using one of the suggestions we made earlier. Humid conditions are ideal for hatching and fry development.

Over the next several hours, expect lots of chasing and biting. This is pretty aggressive stuff, but it’s largely normal. Keep an eye out for extreme stress or physical harm. The female is going to continuously check out the bubble nest. The male will continue to show off, turning aggressive when it doesn’t feel as though the female is responding properly.

When both are engaged in a mating dance, you’re going to see them swimming side-by-side. They will stop sporadically to display sides, flare up, and so forth.

If the female swims up to the male with its head down in a submissive pose, or if it goes straight into the bubble nest, you’re in business!

What Happens During Betta Mating?

The male wants to be able to flip its female mate upside down, and then wrap himself around her at the point of her midsection. This creates a tight squeeze, which will cause them to float to the surface or sink to the bottom of the tank, if they are successful.

The male will eventually release the female, waiting upwards of five minutes before going again. It may take them a few initial tries to make the “connection”, in which the male is essentially positioning themselves to fertilize the female’s eggs.

Successful Betta Fish Mating And Beyond

The female will then release eggs, go into what will seem like a betta fish coma, and begin floating sideways. This is completely normal. While this goes on, the male begins moving the eggs to a safe location. It may even build a new bubble nest for this specific purpose.

The female will eventually wake up, and perhaps elect to help your male in this task. This is fine, but watch that the female does not eat the eggs. Furthermore, once the eggs have been moved, the female and male should be separated. Otherwise, the male will see the female as a threat.

For upwards of thirty-six hours after you’ve separated them, the male will attend to the bubble nest. They will wait for the eggs to hatch into fry. Once the eggs start hatching, your male will work towards catching eggs that fall from the nest, and other tasks along those lines.

After a few days, your betta fry are going to start swimming in the upright position. Congratulations, you have successfully bred your very own bettas! Now, you just have to go through the steps involved in raising your fry into healthy adults!

Gabriel R

Gabriel R

Welcome to Aquarium Fish City(AFC). I’m Gabriel and I have been keeping fish for almost fifteen years. My father was a huge fan of tropical fish and our childhood home had a huge aquarium which he tended and kept hundreds of species of fish over the years. I was always fascinated by our fish tank and would spend hours staring at the fish. They seemed to all have different personalities and would interact differently with one another. Here, you can find out everything you need to know about keeping fish and aquarium maintenance.

Are Bloodworms For My Betta Fish A Good Idea?

Bettas And Bloodworms

Despite a name some find creepy, bloodworms in general have a lot to offer. In particular, they have been celebrated as basically a superfood for betta fish. As is the case with all other aspects of betta fish, you’re going to want to take a certain matter of care in what you decide.

Bettas And Bloodworms

The Complex Relationship Between Bettas And Bloodworms

Why? Because while there are some intriguing potential benefits of bloodworms for bettas, there are also some more problematic considerations that must be kept in mind. First, there is understanding the different types of bloodworms. This can include figuring out which ones are best for your betta.

Dosage is also very, very important, when it comes to whether or not you should feed bloodworms to your bettas. Even those who advocate including them in a betta’s diet will tell you to reconsider feeding them to your fish every single day.

Let’s take a closer look at everything you need to know about bloodworms.

What Are Bloodworms?

There are essentially two different types being sold right now. The first type is an actual worm. The second type is a form of larvae. Knowing what you’re buying is obviously important.

The most common bloodworm type found in stores would be the Chironomidae. Despite being called bloodworms, they are actually larvae from midge flies. The Glycera genus is responsible for the second type you will find in stores. Chironomidae are more common because they are much easier to breed. Glycera types only come from select marine environments.

Why Do People Love Bloodworms For Bettas?

The different versions of bloodworms you can buy come with different benefits. For example, frozen bloodworms tend to come with a far lower risk for parasites than living bloodworms. Another example would be the fact that live bloodworms can be great for those who want to breed their bettas. There are several reasons as to why this is the case.

In a broad sense, people love bloodworms because they can give their bettas a wide variety of vital nutrients. When given to your bettas safely and correctly, which we will cover shortly, bloodworms can play a useful role in maintaining optimal health.

Which Type Of Bloodworm Should I Buy?

Beyond the two types we illustrated above, there are three different ways in which you can buy bloodworms for your bettas. There is no such thing as a universal choice for every betta owner, so let’s go over these three different options in greater detail:

Freeze Dried Bloodworms

This is another perfectly viable option for your bettas. Obviously, freeze-dried means being able to store them longer. This makes them a better choice for those who only have one or two bettas. Unfortunately, due to the nature of how they are freeze-dried, you’re losing a significant amount of nutritional value. You should also make sure to only buy Grade A products, while avoiding Grade B at all costs.

Live Bloodworms

As the name implies, this means buying bloodworms who are still alive, moving around. Since you’re feeding your betta the bloodworm in its most natural form, you stand to get the best possible range of nutrients. Compelling the betta to hunt the bloodworm can also be highly stimulating and beneficial in its own right. However, buying them isn’t very cost-effective, unless you have several bettas. Furthermore, live also means it could also contain parasites and other undesirables. These things can infect your betta fish. Live bloodworms are obviously best purchased at a store in your area.

Frozen Bloodworms

Finally, we have frozen. This can be an ideal compromise for those who want to give their betta a good range of benefits, while also being able to store them for a reasonable amount of time. Available in cubes, make sure to follow directions for dosage closely. Do not simply drop an entire cube of frozen bloodworms into the tank! Frozen bloodworms can be stored for up to six months, and they should always be defrosted before being served.

Make sure your bettas can get to the food! You also don’t want to leave it in there for too long, particularly with frozen. A nice benefit of freeze-dried bloodworms is that they float to the top of your tank, ensuring the bettas will eat them quickly.

At this point, you should have a pretty good idea of what to look for. The next step is to understand how to administer bloodworms to your betta fish safely and correctly.

What Is The Proper Amount Of Bloodworms To Feed Bettas?

Obviously, since betta fish are carnivores, they’re going to love bloodworms. This, combined with their tendency to just eat and eat, means having to pay close attention to how many bloodworms you feed to your bettas.

Bloodworms: A Fine Treat, But NOT A Dietary Staple

To be clear, bloodworms should NOT be a staple of your betta’s diet. This is where some people make a mistake. Yes, bloodworms are rich in a variety of nutrients and other essentials. However, the key word there is “rich.” They are far too rich to be given to your bettas as anything more than an occasional treat. Ideally, you will only want to feed your bettas bloodworms once or twice a week.

Too much fat and protein can wreak havoc with the health of your bettas. It can cause constipation in bettas, and it can also lead to the common betta fish condition known as swim bladder disease.

Ammonia spikes, in addition to a higher threshold for transmitting disease, can also occur when your bettas consume too many bloodworms.

Finally, overfeeding your bettas bloodworms is just a waste of money. There is a fine line where the benefits of bloodworms end, and they become something that is doing your bettas far more harm than good.

How Should I Feed My Bettas Bloodworms?

While betta fish love to eat, remember that their stomachs are not nearly as large as their eyes. Some feed their bettas bloodworms as often as twice a day. This might prove to be fine, but it’s not recommended by most. Again, stick to the once or twice weekly schedule. This is particularly important when introducing bloodworms of any type for the first time.

You also shouldn’t drop an entire bloodworm into the tank. This is similar to our earlier advice regarding how to dispense a cube of bloodworms. In both cases, the bloodworm should be broken down into several smaller pieces. This ensures everything will be eaten. It also ensures your bettas aren’t going to give themselves any problems from trying to consume a larger-than-comfortable piece of bloodworm. Anything frozen should be broken up and thawed prior to serving.

If frozen, you also want to be sure that you drain the bloodworms carefully, before you put them in the tank to be eaten. The juices that come out during the defrost process can be highly contaminable, when included in the tank with the bloodworms themselves. If you are opting for frozen bloodworms due to them offering the most ideal balance of nutrients and protection from parasites/bacteria, dumping the defrosted juices in with the bloodworms can completely undo this benefit.

At the end of the day, your best bet for giving your betta fish bloodworms safely is to remember the following:

  • Follow the manufacturer directions carefully. These will generally steer you in the right direction, and usually cover everything you need to know.
  • Buy your bloodworms from a reputable vendor. Careful research on any company or product you encounter will ensure you’re buying something that will give your betta all of the benefits you have in mind.

As long as you keep these things in mind, combined with the directions we have listed above, you shouldn’t have anything to worry about.

What About Breeding Bloodworms?

Some might suggest breeding your own bloodworms. Potentially, and this is largely dependent upon how many bettas you have, this could prove to be an ideal solution. Breeding gives you a direct source to bloodworms suitable for betta consumption. This can not only save you some time, but it can also save you a good deal of money.

Again, these benefits are largely dependent upon having enough bettas to justify this effort in the first place. If you only own one or two bettas, the work involved in learning how to breed bloodworms for bettas likely won’t be worth it. You’re going to need a lot of space, and you’re going to need to make sure you are getting them to your bettas in time. It isn’t unfathomable to wind up with an infestation of midge flies.

Final Thoughts

Balance and variety are going to be the two most important things your betta will need in its diet. To meet these needs, you’re going to need to research the different types of food betta fish can eat. Live animals are generally considered best, including bloodworms, mosquito larvae, and brine shrimp. Pellets, freeze-dried food, and frozen food are all additional possibilities you can explore. You don’t want to limit your betta to just one thing.

Gabriel R

Gabriel R

Welcome to Aquarium Fish City(AFC). I’m Gabriel and I have been keeping fish for almost fifteen years. My father was a huge fan of tropical fish and our childhood home had a huge aquarium which he tended and kept hundreds of species of fish over the years. I was always fascinated by our fish tank and would spend hours staring at the fish. They seemed to all have different personalities and would interact differently with one another. Here, you can find out everything you need to know about keeping fish and aquarium maintenance.

The Essential Facts On Aquarium Salt For Your Betta Fish

Aquarium Salt for betta fish

Aquarium salt for bettas can make the difference between life and death. However, in other situations, it can be highly problematic to expose your betta fish to this product. This is certainly another example of betta fish care essentials in which research and a careful eye are absolutely essential.

Let’s start with a breakdown of exactly what aquarium salt is. From there, we can look at the different situations in which it might be a good idea to give some to your bettas. All of this information can help to better understand why it is so important to maintain the proper aquarium salt dosage.

Aquarium Salt for betta fish

What Is Aquarium Salt? What Is So Special About It?

At first glance, aquarium salt may not seem all that different from regular salt. The truth of the matter is that they are the same, when it comes to the chemical formula. Both maintain the 1:1 ratio of chloride and sodium. So, why not just give your betta fish regular table salt?

Aquarium salt is not just a marketing ploy, in which the word “Aquarium” is simply slapped on the package. It differs from regular salt on the crucial level of not having the same additives that are traditionally added to the salt you put on your food. Remember that table salt includes stuff for flavor, coloring, and more.

At the end of the day, regular salt can be highly harmful towards the water quality in your tank. Also keep in mind that aquarium salt, among other benefits, works at replenishing the natural electrolytes your bettas need to be healthy. Regular salt does not do that.

Marine salt should also be avoided, for the same reason that it contains additives that can harm bettas.

Where does aquarium salt come from? Evaporated sea waters. It really is that simple.

Let’s take a look at not only some of the most common diseases treated with aquarium salt, but some of the larger benefits of including it in your tank.

What Are Some Of The Diseases And Conditions Treated By Aquarium Salt?

Under the right circumstances, aquarium salt can be invaluable towards treating a number of serious conditions. Other medications are available. However, aquarium salt is not as serious a treatment option, so it’s often a good, relatively safe place to begin addressing an issue.

Here are some of the most common conditions that can be potentially treated with aquarium salt:

  • Fin Rot: Marked by noticeable damage/decay to the fin, poor water quality is considered to be the most infamous fin rot culprit. If your tank is under the ideal temp (78F), with cloudy, debris/poop-filled water, then the water quality needs to be improved IMMEDIATELY. Even darker fins can be an indication. Red spots, severe discoloration, and damage close to the body are all symptoms of a more serious type of fin rot.
  • Ich: This external parasite can attach itself to your betta. This in turn can cause a ton of problems for your poor betta. White spots appearing all over the body is one of the most common symptoms. You should also look for poor appetite, a lack of energy, relatively poorer socialization, and your betta rubbing itself against things inside your tank.
  • Dropsy: Despite the somewhat-silly name, dropsy should always be taken seriously. Not actually a disease, despite commonly being considered as such, dropsy is actually a collection of symptoms that can point to another issue. If your betta is hiding all the time, avoiding other fish, or simply not eating, these signs can point to the presence of dropsy. The presence of pinecone-like scales is considered to be the biggest tell of all.
  • Velvet: Another condition with a somewhat-disarming name, velvet occurs due to the presence of bacteria in your water. Also known as rust and gold disease, your betta’s reaction to the disease can appear in the form of what looks like gold dust on the body of the fish. Lethargy is another symptom to look out for, and this is another disease in which your sick betta will start rubbing themselves against objects in your aquarium.

Clearly, aquarium salt is something that can prove to be a lifesaver in many situations facing your betta. However, you are also going to want to take care to ensure it is exactly what your betta needs. Before we discuss the benefits of aquarium salt, let’s examine times in which your betta should not be exposed.

When Is Aquarium Salt A Bad Idea For Bettas?

While the aquarium salt benefits for bettas can make for a long list, there are also situations in which you should seek alternatives:

  • Do you have any scale-less fish? If you do, they should not come into contact with aquarium salt in any form or fashion. Consider the slimy coat which can be found on their bodies. Without this coat, which aquarium salt can strip, they become susceptible to a range of external infections.
  • Do you have living plants? Live plants are a great addition to your aquarium. They are also fragile to an extent. Some can be damaged severely by the inherent salinity of aquarium salt.
  • What about quarantine? The best decision is often quarantining your betta. This is going to involve a few steps, but it generally becomes the best arrangement for all concerned. Betta quarantine is a particularly good idea, if we’re dealing with something that can be transferred to other fish in your tank.

Barring the above situations, you shouldn’t have anything to worry about. Just remember that the directions for any aquarium salt product should be followed to the letter. Too much of this substance in your tank will not only negate its beneficial elements, but it will potentially be disastrous for all of the fish in your tank.

Nonetheless, overall, the benefits of aquarium salt are absolutely fascinating. You can apply this thought to the subject of whether or not you should regularly dose your aquarium with this specialized salt.

A Closer Look At The Benefits Of Aquarium Salt

One of the more common betta fish topics involves using aquarium salt to do more than treat specific conditions. Some, including many experts, believe it can have ongoing benefits. This again means adhering to a very minimal daily dosage, but it could allow your bettas to enjoy the following:

  • Parasites will be miserable: There are a range of parasites that can infiltrate your tank, attack your bettas, and cause all kinds of problems. Keeping a clean tank will go a long way towards keeping these pests out. However, it is ultimately almost impossible to have a 100% parasite-free tank at all times. Aquarium salt can keep them from ever even reproducing.
  • Nitrates and nitrites: Methemoglobinemia is a blood disorder which can be caused by an abundance of nitrates and nitrites in the water in your tank.
  • Better for coats, gills, and even kidneys: Treating your aquarium with this salt has been shown to improve the functionality of your slime coat. As we mentioned before, this is the coat that protects your fish from getting sick. Aquarium salt can also make your bettas more efficient at using their kidneys to remove water from the body. This also applies to the gills, which should never absorb too much water.

Okay, we’re ready to start adding aquarium salt to your tank!

How To Treat Your Bettas With Aquarium Salt

Keeping in mind that you should probably quarantine your sick betta with what is known as a hospital tank, if you’re using aquarium salt to treat something specific, here are the steps to remember, regardless of whether or not you do that.

  • Do not go above one tablespoon for every five gallons of water in your tank.
  • Aquarium salt should NEVER be added to the aquarium by depositing it straight into the water. Instead, what you want to do is combine a little tank water with the aquarium salt in a container. You only need a very small amount of tank water. Once it has properly diluted, you can have it added to your tank.
  • Once it has been added to the tank, keep an eye on the aquarium for twenty-four hours or so. You should start to notice some improvements at this point.
  • Continue to dose your water in this fashion for a few days. You don’t want to go for any longer than four, five days at the most.
  • Once you’ve gotten to your last day of treatment, you need to change approximately twenty-five percent of the water currently in your aquarium.

This entire process can be repeated on and off for two weeks. After that, if your betta has not improved, their condition is more serious than previously thought. You are going to need to seek out stronger methods of treatment for your betta.

Now, while the above treatment strategy is the one most commonly used, you are not without further possibilities using aquarium salt. There is a method known as salt bombing. Under the right conditions, this can be a powerful way to aid your betta.

What About A Concentrated Aquarium Salt Dose?

This can also be called a salt blast or salt bomb. As any of those names imply, you’re giving your betta a significant dose of aquarium salt over an extremely short period of time. This should not be attempted as your first approach to improving the condition of your betta.

It should be reserved for situations in which your betta’s condition is more advanced, but you also don’t want to progress to a treatment stronger than aquarium salt. You also need to have everything set up ahead of time. Don’t forget that we are only going to expose your betta to this concentrated dose for a very short period of time.

First, get two containers. One is going to have a gallon of water and some aquarium salt. The second container will have a fourth of the recommended manufacturer’s amount, combined with another gallon of water. The second container exists to revive your betta after the initial treatment. You will need to do this prior to returning the betta to the main aquarium.

After you’ve set your containers up, heat your water up to somewhere between seventy-eight and eighty degrees. Put your betta fish in a plastic bag. With this done, your betta can be added to your first container for approximately ten to fifteen minutes. This is meant to get them used to these new, temporary conditions.

Take them out of the bag after fifteen minutes at the most. You can now leave them in the first container for anywhere from five to eight minutes. It is strongly advised that you only go to the eight-minute threshold when treating something serious in your betta. To reiterate, prolonged exposure to these extreme conditions can kill your betta.

You don’t want to shock your betta by adding them straight from the first container to the main aquarium. This can also kill them. The second container exists to make the transition as easy as possible. You only need to leave them in this container for around five minutes. Once you have finished with this stage, you can safely have them returned to the main tank. Put them in another plastic bag, and allow them to float along the top of the tank. You shouldn’t need to do this for more than a few minutes.

Final Thoughts

There might be some concern on your part about the pH levels on your aquarium becoming unstable by adding aquarium salt. You don’t have a thing to worry about. Neither the hydrogen molecules or oxygen molecules are going to be changed or harmed by adding aquarium salt.

Clearly, aquarium salt can be a vital part of your day-to-day care for your betta fish. As long as you maintain the proper dosages, and keep in mind everything else we mentioned above, your betta can gain a lot from aquarium salt. Whether you need to treat something in particular, or want to use it to maintain an optimal tank, make it a point to keep some in your home.

API AQUARIUM SALT Freshwater...
  • Contains one (1) API AQUARIUM SALT Freshwater Aquarium Salt 16-Ounce Box
Gabriel R

Gabriel R

Welcome to Aquarium Fish City(AFC). I’m Gabriel and I have been keeping fish for almost fifteen years. My father was a huge fan of tropical fish and our childhood home had a huge aquarium which he tended and kept hundreds of species of fish over the years. I was always fascinated by our fish tank and would spend hours staring at the fish. They seemed to all have different personalities and would interact differently with one another. Here, you can find out everything you need to know about keeping fish and aquarium maintenance.

Types of Betta Fish 2020 – By Tail, Pattern and Color

betta-fish-types

Whether you are a beginner aquarist or a seasoned aquarist, you know that Betta fish are one of the most popular freshwater fish available on the market today. Bettas come in a broad spectrum of colors and shapes. Because of this, they tend to be classified by their tail type, colors, and patterns. 

Although they have a reputation for having an aggressive temperament, as long as you know how to care for them and what kind of tankmates they prefer, you can avoid the aggressiveness by properly fed and care. 

betta-fish-types

Betta Fish Varieties

Betta fish, nicknamed Siamese Fighting fish because of their aggressive temperaments, is one of the most common fish purchased by beginner aquarists. These fish are the perfect starter fish with their small size, vibrant colors, and unique personalities.

Over the years, breeders have crossbred Bettas to create some very striking tail variations, along with vibrant and unique colorations. Bettas are also intelligent fish and can eventually begin to recognize their owners.

Bettas have a unique physiology that allows them to breathe surface air when their gills are unable to get sufficient oxygen from their surrounding water. This unique organ is called a labyrinth organ. During breeding, they will also create bubble nests to cradle the eggs spawned by the female Betta.

When classifying Bettas, you look at their tail shape first, then their pattern, and their coloration. There are many variations in the tail alone, from neat and short to flowing and long. The Betta’s body patterns will range from single body patterns to multi-colored patterns. 

But it is their vibrant colors that are the most attractive characteristic. You can find Bettas in every color of the rainbow. Between the Betta’s coloring, patterns, and various tail shapes, there are literally hundreds of types of Bettas on the market, with each fish being uniquely beautiful.

Betta Tail Variations

There are many distinctive variations of the Betta’s tails. Because of this, many Bettas are classified by the size and shape of their tails. Bettas have tails that vary from long and majestic, to spikey and short. Usually, the Betta’s name will give you an idea of what shape their tail is. Some of the more common names include Crowntail, Veiltail, Halfmoon, and the small Plakat. 

Crowntail Bettas

Crowntail Bettas
Helder Caçoila

One of the most popular Bettas is the Crowntail Betta. First bred by breeder Ahmad Yusuf about 25 years ago, this particular species hasn’t really been around long. The fins for the male Crowntail Betta are long and spikey, slightly resembling a crown. The female Crowntail’s colors are lighter, and they have a shorter tail. Unfortunately, their appearance is not as majestic as that of their male counterparts.

There’s another Betta that is very similar to the Crowntail, called Combtail. The Combtail has webbing on its fin that reaches about 2/3 of the way up the tail. 

Veiltail Bettas

Veiltail Bettas
Kausthubh Kamath

Veiltails are also quite common. The male Veiltails have tails that are long and flowing with a downward swoop of the tail. Veiltails come in a variety of color variations, making it a very striking Betta.

The Veiltail is a dominant characteristic when it comes to breeding, making it easy to breed. The female Veiltail looks different than the male. She does not have the same characteristics as the male Veiltail, but she does have brights colors occasionally, although their colors still tend to be lighter than the males. They also have short tails and fins. 

Plakat Bettas

The name Plakat comes from the Thai word “plakad”, which means fighting fish. This particular breed was bred and used for fighting quite commonly. Plakat Bettas are the exception to the rule for male Bettas. Instead of having the long and flowing tails and fins, their fins are short.

Despite having shorter fins, the male Plakat still has amazingly vibrant coloring. The Plakat is considered to be the Betta’s traditional form, which you would have found in their natural habitat in the wild.

Halfmoon / Over-Half Moon (OHM) Bettas

Halfmoon Bettas
Shane Morel

Halfmoon Bettas have a large tail that creates a half-circle that looks similar to a half-moon. You will not find these Bettas in the wild; they are bred only in captivity. Halfmoon Bettas are very popular among breeders and are quite common at the Betta shows and exhibits. 

The Halfmoon Betta was first created in the 1980s. They became so popular that breeders worldwide, especially in Europe, made this species famous internationally. However, these fish tend to be a bit more challenging to breed due to their overly aggressive behavior.

Double Tail Bettas

Double Tail Bettas​
Nikita

With two distinctly separate tails that are separated at the base, the Double Tail Betta is easy to recognize. Usually, this species of Bettas has a shorter body with a longer and larger dorsal fin. 

You can find this particular gene in various Bettas with any size and shaped tail. This can cause single tail Bettas to show the same characteristics as the double tail, with extra rays on their dorsal fins, which tend to give them a much richer appearance.

Dumbo Bettas or Elephant Ear Bettas

Dumbo Bettas

The Dumbo Bettas are unique and don’t exactly fit into one particular color or tail category because of their unique pectoral fins. Their name derives from their two pectoral fins’ funny appearance, which makes them look like elephant ears. 

The Dumbo Bettas that have been bred for the aquarium trade will have strikingly brilliant colorations, such as yellows, reds, turquoises, and bright blues. However, when found in the wild, they tend to be dull-colored, with colors ranging from brown, grey, to dark green.

Delta Tail Bettas

delta tail betta fish
☆HΞΔTHΞRFΔCΞ

Delta is the Greek word for the letter d, which is shaped like a triangle (∆). The Delta Tail Betta has a large tail that is narrow close to the body but widens into a triangle shape, like an inverted triangle.

While the tail spread of a normal Delta is usually smaller, without crowing or combing along the tail edges, the Super Delta’s tail reaches a flare of 180°.

Rosetail Bettas

Rosetail bettas
Kyaw Tun

The Rosetail Betta’s tail has branchy rays, which make the caudal fin look like a rose. A Half Moon variation that causes the caudal fin’s total spread to reach more than 180° gives the Rosetail a very striking appearance. However, it could be considered to be a Feathertail if the tail is exceedingly branch and has a ruffled appearance. 

Other Tail Variations

Although the tails we have already gone over are among the most common and ornamental, there are many more different variations of the Betta’s tail:

  • Spade Tail Bettas – the tails of these Bettas look exactly like the Spade from a deck of cards with its round and pointed shape.
  • Over Halfmoon – the not-so-clever name comes from the over 180° tail spread of a Halfmoon Betta. Basically like an extreme variation of the Halfmoon.
  • Combtail Bettas – these Bettas resemble the Crowntail Bettas. The way to tell them apart is by the length of the rays and the webbing. The Combtail’s webbing reaches up the tail over 2/3 of the way.
  • Roundtail Bettas – the edges of these Betta’s tails are fully rounded, quite similar to the Delta Bettas, just the tail edge shapes differ.
  • Half-Sun Bettas – selective breeding between Crowntails and Half Moons create this variation of Bettas. The fins and tail reach around the body over 180° with what looks like a slight crowning along the webbing and rays.
You might also be interested in: Top 7 Best Betta Fish Tanks 2020

Types of Betta Fish - By Color

Bettas come in a wide variety of colors, with some sporting uniform coloring, while others are a kaleidoscope of many different colors. Their brilliant coloring represents most of the colors of the rainbow with a few extras thrown in, such as translucent, copper, white, and black.

Blue Betta Variations

Blue Betta Variations​

Blue is not a simple color. There are many different variations of the color blue. In the Betta fish world, the most common shades of blue are Steel Blue Betta, which is a cold grayish-blue, and Royal Blue Bettas, which have a gorgeous, brilliant iridescent blue coloring.

Black Orchid Bettas

Black Orchid Bettas
Daniella Vereeken

Just like the name says, the Black Orchid has a blackish color to it with hints of blue or purple highlights around its body. There are three different variations of the black coloration that can be grouped into either the Black Lace, Melano, and Metallic Betta, which has iridescent scales that are almost translucent or copper-colored.

Red Bettas

Red Bettas

Amongst all the different variations of Betta fish, red is the most dominant color. The more common red is a striking, deep, and rich red. If red is not the dominant color on the Betta, you will often see red highlights across the body and fins of the Betta.

If your red starts to appear washed out, you may need to check their water conditions and diet to make sure they are healthy. 

Pink Bettas

Pink Bettas
Heather Klebs

Although it looks almost translucent and is often thought to be an albino variation, the Pink Betta is actually pink because it barely has any pigment and the flesh shows through the Betta’s skin. 

If the pink is a fuller pink, the Betta usually has a brighter, richer pink color on their fins and body. If this is the case, they will usually have additional color variations along the body and tail, such as whites, purples, and reds. 

Rose Petal Bettas

Rose Petal Bettas
Aquariumfish.net

Rose Petal Bettas are one of the more unique variations because there is not an easy way to define them. They have more color variations than any of the other Bettas, usually a light electric blue with some dark blue or copper highlights, with a dark-colored face. 

The Rose Petal Betta is one of the rarest on the market.

Yellow Bettas

Another common color you will find among Bettas is yellow. Yellow Bettas generally have a rich, full-bodied yellow coloring that extends along the tail and fins. There are many variations of yellow coloring, from a pastel yellow to a school bus yellow. The yellow variations are known as “non-reds” because they have similar characteristics as the red, but instead, they are yellow.

White Bettas

White Bettas
Atom

When comparing the white Bettas to other variations of Betta coloring, the white coloring may seem to be a little plain since they are entirely white. But with the right type of tail, these white Bettas can look very majestic. Shop around for the tail type that appeals the most to you. Swooping and flowing tails are very majestic when they are completely white-colored.

Purple Bettas

Purple Bettas​
matthias dieux

If you are looking for a Betta fish that is a true purple color, you might have a hard time finding one. It will be easier to Bettas that are a purple-blueish coloring or a rich violet. A lot of times, these Bettas will have various color highlights, such as blacks and coppers. You can find them with purple-ish bodies, but with the face and fins of a different color.

Purple Bettas have many different types of tails and color patterns. With so many different options, it should be easy to find one that suits your tastes. 

Green Bettas

Green Bettas

If you find a Betta fish that is entirely green, you will be gazing upon a rare Betta. They usually appear to be more of a turquoise color. Or, the green coloration will be masked underneath a darker color, but if you shine the light on it just right, you will see an iridescent green shimmer. 

Dark green and bright green Betta variations that are clearly discernable are rare, but they do exist, and they are considered to be quite precious. 

Mustard Gas Bettas

Mustard Gas Bettas​
Hnib

The Mustard Gas Betta is very remarkable with bi-colored variations that show different color variations between the fins and the body. The Betta’s body is usually a dark blue or green color, while their fins tend to be orange or yellow, which is where their name comes from. 

Sometimes this variation is called Chocolate-colored by mistake because the fin color is very similar. However, the Chocolate-colored Betta has a body that is completely brown.

You might also be interested in: most common betta fish diseases

Types of Betta Fish – By Pattern

Finally, the last way in which Bettas are classified is by their patterns. The way a Betta’s coloring is arranged along their bodies and fins in different patterns makes them one of the more popular sought after fish in the aquarist community. Selective breeding has created some unique patterning. 

Dragon Scale Bettas

Dragon Scale Bettas​

Selective breeding has recently created a new pattern called Dragon Scale. The vibrant metallic colorations make this particular pattern very popular with a full-bodied color and body scales that resemble those of a dragon or lizard. They usually have a rich base color like red with pale iridescent scales across the main body, which is sometimes copper-colored.

Butterfly Bettas

Butterfly-betta

Another relatively distinctive and common Betta pattern is the Butterfly pattern. The body is usually a solid color that will extend to the tail’s base and the fins, where the color will stop suddenly and then is replaced by a more iridescent, paler color. The tail and fins are usually transparent or white. 

Another popular variation of this particular pattern is for the body to be one color, but the tail and the inside fins will be a different color but fade to white or even transparent along the edges. 

Marble Bettas

Marble betta
David Sucianto

With striking color variations, the Marble Betta is another trendy variation of Bettas. Their body usually has a solid but pale body-color with rich blues and red that appear irregular and blotchy. The fins are the part of the Betta’s body that appears marble-like in pattern. Although, sometimes they have a translucent coloring, too. 

One remarkable thing about this particular variation is that their colors develop over time. They will also appear to be one color one week and a different color the next week. This ability will slow down as the Betta ages. 

Koi Bettas

Koi Bettas​
Marlo Lao

Through selectively breeding the Marble Bettas, the breeder created the Koi pattern that resembles the popular pond fish. You will not find this species in the wild. Rather aquarium hobbyists have carefully bred them while preserving the most unique and striking features and characteristics. The rich colorations and their brightness will vary greatly, resulting in no distinct coloration of this particular pattern. 

Summary

With so many different variations of patterns, colors, and tail shapes, the Betta is definitely not a boring one-size-fits-all fish. Through years of careful and selective breeding by experts, there are now hundreds of types of Betta fish on the market today. 

The Bettas you find in the wild won’t be as vibrant and colorful as the ones you will find with breeders and fish stores. With all the different varieties, you are sure to find the perfect Betta for your aquarium. 

Michele Taylor
Michele Taylor

Hello, fellow aquarists! My name is Michele Taylor, and I am a homeschool mother of six children, which includes five boys and one girl. Growing up, our family had a large aquarium with angelfish, goldfish, and lots of different varieties of neons.

Top 7 Betta Fish Tanks 2020 (Buying Guide & Reviews)

Best Betta Fish Tanks

Bettas are the perfect starter fish for beginners. Because they are so easy to take care of, many beginners will assume that fishbowls, mini fish tanks, and novelty fish tanks are ok for Bettas to live in. However, this is untrue. 

Bettas thrive in tanks that are at least 10 gallons and larger because they have plenty of space and open water to swim around. Because of their aggressive natures, people tend to keep them in tanks by themselves, which is another reason people keep Bettas in small tanks. 

This guide will teach you everything you need to know about fish tanks and review some of the more popular betta tanks available on the market today. 

Best Betta Fish Tanks

Everything You Need to Know When Choosing a Betta Fish Tank

Some of the factors to take into consideration when looking for a fish tank will be:

  • Buy a filter and Fluval water heater to go along with the tank.
  • Provide plenty of hiding spots with rocks, caves, and live plants such as Java Fern and Java Moss
  • Do not choose a substrate that has hard or sharp edges that can damage your Betta’s fins. Instead, choose fine gravel or sand.
  • Break down a new tank’s nitrites and ammonia and establish the right kind of bacteria in the tank by completing a full cycle before adding any fish.

Appropriate Tank Sizes for Bettas

There is a misconception about keeping Bettas in small novelty tanks less than 5 gallons. This misconception probably originated from people believing that because Bettas originated from the shallow streams and rice paddies of Asia, they would be suitable for the small novelty tanks. 

Although their native waters were shallow, they were extensive. This allowed them plenty of room to swim around and travel. It is not humane to put Bettas, or any fish for that matter, in anything smaller than a 5-gallon tank. 

With the smaller tanks, it can be challenging to maintain stable water parameters. Because there’s not much water in the tank, ammonia spikes are common, and when they happen, they can happen very quickly. 

Tanks that are larger than 5 gallons will give your Bettas more space to swim around in, which is more pleasing for you to watch. In small novelty tanks, Bettas can’t swim around, which isn’t very visually stimulating for you. 

If you are only keeping one Betta, a 10-gallon tank will be the perfect size for your Betta. Not only will the water parameters remain more stable, but it will not need as much maintenance as a smaller tank would. The larger tank also gives them plenty of room to swim around. 

There are many different Betta species, in which all of them require at least a 5-gallon tank. However, there are some species that will require a larger tank, so you will want to do your homework on the species you wish to keep. 

You might also be interested in: Types of Betta Fish – By Tail, Pattern and Color

The Need for a Tank Filter

Another common misconception concerns the acceptable water conditions in which Bettas can live. Many people believe that because Betta’s lived in shallow waters, they are conditioned to live in dirty water. But this is far from the truth. 

The Betta’s native environment contains various plants and organisms which create large biodiverse ecosystems. These plants and organisms keep the water naturally oxygenated and cleaned. 

In their native environment, Bettas can jump from small bodies of water to larger bodies of water. Because Bettas are labyrinth fish and can breathe oxygen from the air, they are able to do this.  

People wrongly assume that their tank size doesn’t matter because of their ability to breathe oxygen from the air. However, any time they are forced to take oxygen from the air, it should only be a temporary situation for them. 

Although Bettas are able to survive in small puddles, it is mistaken for people to believe they will do well in small bowls and cups. Bettas that are kept in small containers will not thrive, they will possibly get sick, and they definitely will not live for very long

A filter will provide the oxygen-rich environment your Bettas need in order to thrive. Although we don’t recommend it, if you chose to go filterless, you would need to perform a 40% partial water change every three days to keep the water clean and the water parameters healthy.

Another thing you might need to consider when using a filter, you may need to use a pre-filter, such as a sponge over the outlet, to keep the water flow from becoming too harsh.

The Need for a Tank Heater

In their natural habitat, Bettas live in the warm waters of Cambodia and Thailand. Because of this, they will thrive in tank water above 76°F. In order to maintain water temperatures above 76°F, you will need to install a heater in the tank. Unless, of course, you live in an area of the world where the climate is warm year-round and your fish tank will stay at a constant temperature about 76°F.

Install a thermometer opposite of the heater, at the other end of the tank. With the use of the thermometer, you will be able to ensure the tank’s water remains at the proper temperature throughout the tank.

Reviews Of The 7 Best Betta Fish Tanks Available

1. The Best Aquarium Starter Kit: Aqueon Aquarium Fish Tank

You can buy the Aqueon Starter Kit in either a 10-gallon tank or a 20-gallon tank. Everything a beginner needs is included in the Aqueon Starter Kit, making it the perfect setup for a beginner. 

Included in the starter kit are:

  • Complete easy to follow instructions
  • Glass aquarium with LED lights in the hood
  • Fishnet
  • Fish food
  • Heater, preset and submersible, shatter-resistant with auto safety shut-off 
  • Water conditioner
  • Filter with an LED light that flashes when the cartridge is ready to be changed

The Aqueon Starter Kit is the perfect, no-fail setup for the beginner aquarist all in one complete set. All you need to do is add the Betta, substrate, and decorations.

Tank Dimensions: 20.25 x 10.5 x 12.5 inches.

Pros:

  • Easy to assemble
  • Affordable 
  • Perfect starter kit for beginners
  • Small feeding door in the lid
  • Complete kit includes everything you need

Cons:

  • Does not have hinges
  • Cleaning is challenging
  • Low lighting 
  • The filter is noisy
Aqueon Fish NeoGlow LED...
  • 10 Gallon Glass Aquarium with orange fluorescent silicone

2. Marina LED Aquarium Kit

The Marina LED Aquarium Kit is the perfect setup for beginners and pro aquarists alike. This complete kit includes everything you need to get your aquarium started:

  • Marina Slim S10 clip-on filter with quick-change filter cartridges promotes biological filtration, traps floating debris, removes pollutants, discolorations, odors, and toxic ammonia.
  • Long-lasting, natural daylight effect LED lighting module is seamlessly incorporated into the aquarium canopy for an unobstructed view of your aquarium. The LED lighting enhances fish and plant colors and is perfect for low light plants.
  • Fluval Max fish food to keep your fish healthy and happy.
  • Fluval Aqua Plus Water Conditioner to make tap water safe for fish.
  • Fluval Cycle Biological Supplement to create a biologically safe environment.
  • Aquarium environment Fish net, made from fine soft mesh to protect delicate fins.
  • Aquarium Care Guide that includes advice on how to set up and maintain your aquarium.

All you need to do is add the fish!

Tank Dimensions: 20″ L x 10″ W x 12.5″ H

Pros:

  • Filter is quiet
  • Double boxed for safe shipping
  • Filters are inexpensive

Cons:

  • Does not come with a heater
  • The LED light does not have a nightlight setting
  • Side pieces are refective, could cause your Betta to want to fight his reflection.
Sale
Marina LED Aquarium Kit, 10...
  • 10 U.S. gallon glass aquarium

3. GloFish Aquarium Kit Fish Tank with LED Lighting and Filtration Included

For a complete aquarium starter kit, the GloFish Aquarium comes with a great starter price for everything that is included:

  • Glass tank
  • Comes with curved corners
  • Tetra hidden filtration
  • Adjustable flow filter pump

The GloFish aquarium kit comes with optimized blue LED lighting to make your fluorescent fish shine! The hinged LED lighting cycles through four modes: 

  • Sunlight mode
  • Twilight mode
  • Moonlight mode
  • Midnight mode

Package Dimensions : 19.3 x 14.1 x 13.5 inches; 16 Pounds

Pros:

  • It takes up less space than longer tanks
  • It cycles through four lighting modes
  • Filter is quiet and easy to replace
  • Sturdy base
  • Easy to clean
  • Easy to setup

Cons:

  • Self-contained filter is a pain to prime
  • Filter is noisy
GloFish Aquarium Kit 5...
  • INCLUDES ALL THE ESSENTIALS: This 5 gallon kit includes a curved-corner, glass tank, Tetra Hidden Filtration with an adjustable flow filter pump, GloFish Cycle Light with four modes.

4. Fluval Spec V Aquarium Kit

This sleek, contemporary tank features an overhanging light system. It also comes with an efficient filter and pump included in the aquarium kit. With the aluminum trim around the edges giving this glass tank a stylish look, it’s perfect for home or the office.

Sporting 37 LED lights, the overhanging light system lights up the tank perfectly, highlighting your fish’s coloring to the best advantage. The circulation pump is adjustable and powerful. It also comes with a three-stage filter that has a foam block with biomax rings and activated carbon, which ensures the filtration system is effective mechanically, chemically, and biologically.

If the flow that is created by the filter is too powerful for your Betta, you could try using a pre-filter sponge to help reduce the water flow. 

Dimensions: 17.2 x 10.6 x 6.3 inches

Pros:

  • The sleek, narrow, contemporary design fits well on smaller surfaces.
  • Quiet pump.
  • Excellent lighting 
  • Easy to maintain and clean
  • The filter has a separate compartment

Cons:

  • Water flow might be too powerful for some Bettas
  • No ideal place to put the heater
  • Have to remove the light bar when performing maintenance work
  • Lights may not be strong enough for most plants
Sale
Fluval Spec V Aquarium Kit,...
  • 5 gallon Nano aquarium

5. Aqueon 10 Gallon Black Aquarium

Although this is the least expensive option in our review, you will need to take into consideration that this is not a kit. You will need to either buy or add your own equipment to this tank. You will need to add a lid, heater, lights, and filter.

If you are looking for a simple, but quality aquarium, this glass aquarium is perfect for you. Especially if you already own all the equipment you will need to add to this particular aquarium. Or, perhaps, you have a specific brand in mind for the filter, pump, lights, etc. and you want to customize your tank.

Dimensions: 20.25 x 10.5 x 12.5

Pros:

  • Simple shape
  • Affordable 
  • Sturdy, quality tank
  • Customize by adding your own equipment
  • Perfect option for a quarantine tank.

Cons:

  • Lid not included

You will need to buy heater, filter, lights, etc.

Sale
Aqueon Standard Glass...
  • High quality glass construction

6. Fluval Flex 57 – 15 Gallon Nano Glass Aquarium Kit

This aquarium kit comes complete with everything you need for the large 15-gallon tank, perfect size for your Bettas. This kit invludes a sturdy 3-stage filter that efficiently cleans the water through biological, chemical, and mechanical media.

The unique and striking curved front has a contemporary feel to it and contrasts pleasingly with the straight sides. Included in the kit is the LED lighting and remote control, making it convenient to increase and decrease the lighting when needed. There are also cool lighting effects, such as a lightning effect and a faded cloud effect. 

This high-quality tank comes with a few innovative extras that you will appreciate, such as a grid pattern along the top of the tank that reduces the water line’s visibility. 

Dimensions: 16 x 15 x 15 inches

Pros:

  • Striking design with a curved front wall
  • 15-gallon capacity gives your Bettas plenty of space to swim around and play
  • The wires can be stored and hidden behind the tank
  • Includes ample space for adding additional filtration or heater
  • Several cool lighting effects to choose from

Cons:

  • The hood might be flimsy
  • The back of the black plastic shows scratches
  • Boring black background
  • Filtration creates a strong current
Hagen HG Fluval Flex Aquarium...
  • The Fluval 15 gallon flex freshwater kit is one of very few freshwater aquarium Kits to incorporate brilliant illumination and multistage filtration with convenient Aquarium features and contemporary...

7. Life 15 Aquarium with LED Light

This is by far the most expensive aquarium on the list. If you are into luxury contemporary, this is the perfect indulgence for you. It comes in several different sizes to meet your needs.

Made from acrylic rather than glass, it is 10x stronger than glass, plus it’s 50% lighter. The contemporary design includes a molecularly bonded, visually seamless aquarium. Acrylic also has a 93% transparency rating.

This kit includes a genuine five-stage filtration system: Oxygenation, water stabilization, chemical, mechanical, and biological.

This aquarium kit includes:

  • Acrylic Aquarium
  • biOrb 12V Transformer
  • biOrb Air Pump
  • Airstone
  • 2 pounds / 900 grams ceramic media
  • Filter cartridge
  • 5 ml Water Conditioner
  • 5 ml Beneficial Bacteria liquid
  • Intelligent LED Light unit

Dimensions: 7 x 10.5 x 15.75 inches; 11.7 Pounds

Pros:

  • Low voltage, 12v transformer
  • LED lighting – long lasting and low voltage
  • Comes in 4, 8, 12, and 16 gallons

Cons:

  • It’s pricey
  • Filtration system does not handle tannins well
  • You have to remove the top of the aquarium to feed the fish
  • Challenging to set up
biOrb Life 45 Aquarium with...
  • Filter cartridge – a true “one size fits all” Filter for the biorb aquariums

Summary

Bettas are majestic and beautiful fish that come in a wide range of patterns and colors. You have learned that Bettas do NOT do well in small tanks and bowl that are less than 5 gallons. Instead, they prefer lots of room to swim, play, and hide in.

Hopefully, this review has helped you choose a suitable tank that will make both you and your Bettas happy, whether it’s one of the aquarium kits or just the tank. 

There are several to choose from. One is perfect for you that will fit your budget perfectly but will also look good in your space. If you already have your own equipment, or you’ve done your research and you know the best heater, pump, and filtration system you’d like to buy, then we recommend buying just the Aqueon 10 Gallon Black Aquarium. This will allow you to customize the tank any way you want. 

However, if you want an all-inclusive aquarium kit, we recommend The Best Aquarium Starter Kit: Aqueon Aquarium Fish Tank. Everything you need is included in the kit. All you need to add is the fish. 

If you prefer the luxurious and contemporary look, and don’t mind the price tag, then the Life 15 Aquarium with LED Light is perfect for you. This aquarium kit comes with everything you need to set up your tank. The rich, sleek design will have your friends and family mesmerized. 

We hope that this review leads you to find the perfect tank that fits your budget, your space, and your fish. 

Michele Taylor
Michele Taylor

Hello, fellow aquarists! My name is Michele Taylor, and I am a homeschool mother of six children, which includes five boys and one girl. Growing up, our family had a large aquarium with angelfish, goldfish, and lots of different varieties of neons.

Does Your Betta Fish Have Popeye? Here’s What You’ll Need To Do

Popeye In Betta Fish

Don’t let the cute name fool you. Despite sharing a name with a beloved cartoon icon, Popeye is no laughing matter in the context of your betta fish. While the condition is not inherently deadly, it can make things quite unpleasant for any betta which catches it. Popeye is also complicated by the fact that it can lead to other problems.

Popeye In Betta Fish

The Good News About Betta Fish And Popeye

In other words, if you are just beginning to learn about Popeye, here is the most important thing to keep in mind: You want to deal with the problem as quickly as possible. Again, Popeye treatment is fairly straightforward, and it comes with a huge success rate. Nonetheless, as is the case with many other betta fish infections and diseases, a rapid response on your part is the most essential component to treating it effectively.

The other good news about Popeye is that it’s fairly easy to diagnose. It is unlikely that you’re going to be wrong, if you even suspect your betta has this condition in the first place.

Also, keep in mind that while Popeye in of itself is fairly easy to treat, it could be in of itself a sign of a more serious condition. To that end, we would suggest reading up on common betta fish diseases and potential treatments.

Let’s take a closer look at what we’re talking about, when we talk about Popeye and betta fish.

What Is Popeye In Betta Fish?

First of all, let’s get that name out of the way.

Popeye is exactly what it sounds like. It is a condition that can cause the eye of your betta to stick out, protrude, or “pop” out. Hence the name. While it can be fatal, if left untreated, there are thankfully a number of measures you can take. However, at the end of the day, prevention is considered to be the wisest course of action.

Avoid the conditions by which your betta can get the infection, and you really shouldn’t have anything to worry about.

Next, we’re going to discuss some of the most prominent symptoms to watch out for.

Symptoms-Of-Popeye-In-Bettas
Saveena (AKA LHDugger)

What Are Some Of The Most Common Symptoms Of Popeye In Bettas?

Popeye can be extremely uncomfortable for your betta, as you might be able to imagine. This, combined with the very real potential for death with untreated Popeye in betta fish, makes learning about the different symptoms an imperative.

Here are the most common Popeye symptoms in betta fish:

  • The eye pops out: We’ve already touched on this particular symptom, but it is well worth mentioning again. Popeye can only impact one of their eyes, but it is not uncommon to see a betta suffering from this infection with both eyes protruding. This is the definitive symptom of this particular infection. If one or both of the eyes are sticking out, your betta DEFINITELY has Popeye.
  • The eyes change color: While the protruding eye is the most common symptom, there are a few more you want to look for. The presence of a different eye color is a good example of what we are talking about. If you see a cloudiness, or a milky texture, within their eyes, there is a good chance that one of their corneas has been broken. It could also simply be bloodstained. This can indicate physical aggression in some form or fashion.
  • The eyes have a white ring around them: This is another certain sign that your betta has Popeye. This is a good symptom to watch for prior to the eye popping out. If you notice this white ring, then there is an excellent chance that your betta is in the beginning stages of Popeye. At this point, treatment is all but guaranteed to be successful.

How Popeye Influences Your Betta In Other Ways

There are a number of additional Popeye symptoms you are going to want to keep in mind. However, these should be taken with a grain of salt. This is simply because they could be indicators of any number of infections or diseases. This is why it is a good idea to keep an eye on your betta, as soon as you recognize something about their appearance or behavior that seems off to you.

Obviously, if your betta is feeling stressed out, or happens to be fighting some sort of infection, other health issues are likely to emerge. If you notice that your betta is no longer eating or interacting with other fish as it should, then there is a good chance that at least something is wrong. It may or may not be Popeye, but you’re definitely going to want to keep an eye on your betta for the next few days.

Another red flag comes in the form of a betta that doesn’t seem to do anything but stay in one place.

With all of this in mind, you’re much closer to knowing how to treat Popeye in betta fish.

However, once again, prevention is in fact the best way to ensure your bettas never have to deal with Popeye. The best way to tackle this end of things is to study up on causes. The more you know about these possible causes, the easier it will be to see how to prevent Popeye in bettas.

What Are Some Of The Causes Of Popeye In Bettas?

Determining the cause of Popeye in your betta can be a bit difficult to do, in terms of pinpointing the exact cause. This can make treatment a little challenging, but still by no means impossible. This also points to what we were saying about earlier about prevention ultimately being easier and more effective than treatment.

Still, keeping that eye towards prevention, it can be very helpful to at least know some of the most common Popeye causes in betta fish.

These causes can be broken down into two distinct categories, which can serve to make things a little easier for you.

What Causes Unilateral Popeye In Bettas?

In order to have the best possible understanding of causes, when it comes to Popeye, we need to break things down into two categories: One is unilateral, which only impacts one eye. The other is bilateral, in which both eyes are impacted.

As you will find, the best treatments for bilateral Popeye are fairly different from the best treatments for unilateral Popeye in Bettas.

If only one of the eyes of your betta is damaged, the odds are low that you’re dealing with an infection. In all likelihood, the damage in question comes from something physical that happened to them. Yes, it is easy enough for a betta to cause some form of injury to their eyes. This can be caused by something as simple as bumping into something inside the tank.

By the same token, it can just as easily be something that comes from bullying caused by other fish. If that happens to be the case, then you will want to take the steps necessary to stop the bullying. This may or may not include isolating the abused betta from the other fish in the tank.

Now, if both eyes on your betta are damaged, this in of itself points to a good chance that your betta is dealing with some sort of infection. Such an infection can come from a variety of sources, including bacteria, fungus, and parasites. The best way to figure out which disease or infection your betta is suffering from is to look fore other symptoms. Click here for an article that can get you started in the right direction.

At this point, we can start to deep dive into exactly what your options are for treatment. We will also revisit the merits of prevention one more time with some specific suggestions.

What Are The Best Ways To Treat Popeye In Betta Fish?

Treatment should be started as soon as possible, regardless of the specific type of Popeye afflicting your betta. This is another example of a betta fish condition in which a minor problem can very quickly turn into something more serious, if you don’t make an effort immediately.

Once again, we’re going to break things down by the different types of Popeye you can run into.

Betta Treatments For Unilateral Popeye

Luckily, if you are only dealing with Popeye caused by physical harm, both the treatment and your prevention measures are going to be easy to address. To reiterate, treatment should be started as soon as possible.

At the same time, it is worth noting that this form of Popeye in betta fish is traditionally not fatal. If the stress becomes too much, however, your betta can potentially suffer in other fashions.

Here is what you’ll need to do:

  • Move roughly ten percent of the water in your aquarium to another tank.
  • The next step will be to purchase some Epsom salts. There are tons and tons of choices available to you on that front. Following all directions on the packaging of your purchase very, very carefully, you will next begin adding the Epsom. You should not be adding more than one tablespoon per gallon of water.
  • The Epsom salt should be fully dissolved, before introducing it to your betta.
  • How long to leave the betta in this new tank? A good rule of thumb is around ten minutes.
  • Give your betta a couple of minutes in which to get used to things, before you have them returned to the tank.

You also have the option of aquarium salt. This comes with the built-in, long-term benefit of improving the immune system of your betta to a meaningful degree.

Epsom Salt by Sky Organics (5...
  • Contains: 1 x 5 lb. bag of Epsom Salt by Sky Organics, Medium grain Magnesium Sulfate.

Betta Treatments For Bilateral Popeye

As we said before, a case of bilateral Popeye points to the strong probability that your betta is fighting some sort of bacteria, fungus, or other problematic disease. The treatment method you choose with eventually have to keep this fact in mind.

Here are the basic steps behind dealing with bilateral Popeye:

  • Your first step is going to be to set up a quarantine tank. This can be a 5-10-gallon tank with a filter, the ideal temperature, something for the bottom, and something for your betta to hide in or interact with.
  • Your original tank should be changed completely. This lowers your chances of the infection being passed to other fish in your tank.
  • A combination of aquarium salt and amoxicillin are going to be vital, in terms of treating this infection properly and safely. Follow directions for dosages. If you still aren’t sure, ask a trusted medical professional. The amoxicillin should be mixed with aquarium water, prior to adding it to the tank.
  • Every three days, swap out the water completely, while adding another doses of amoxicillin and aquarium salt. The amoxicillin should not be used for more than ten consecutive days.
  • With the treatment finished, keep an eye on your betta, and see if their condition improves.
Sale
API AQUARIUM SALT Freshwater...
  • Contains one (1) API AQUARIUM SALT Freshwater Aquarium Salt 65-Ounce Box

How To Prevent Popeye In Betta Fish

Prevention comes down to keeping in mind the two main avenues of what causes Popeye in betta fish. The first is an infection, bacteria, or even parasites. The second is damage.

Do not overpopulate your aquarium. This not only forces your fish to fight for resources, but it can create a highly stressful situation for your bettas. The more fish in your tank, the more poop you’re going to be dealing with. It is also possible for other fish to bother your betta, which can create Popeye in one way or another.

Make sure the water is being changed regularly. This also means having a good filter for your system.

It is also possible to cause damage by scooping them up too quickly in the net, keeping plastic furniture in the tank, or even the sudden turning on of the aquarium lights.

Conclusion

With all of the information above, you shouldn’t have to worry too much. Remember that Popeye can be transferred from one fish to the next, if we are talking about an infection-based example.

Gabriel R

Gabriel R

Welcome to Aquarium Fish City(AFC). I’m Gabriel and I have been keeping fish for almost fifteen years. My father was a huge fan of tropical fish and our childhood home had a huge aquarium which he tended and kept hundreds of species of fish over the years. I was always fascinated by our fish tank and would spend hours staring at the fish. They seemed to all have different personalities and would interact differently with one another. Here, you can find out everything you need to know about keeping fish and aquarium maintenance.